We are glad to present the result of of tremendous work done to you. I’d like to thank the team of people working on the project. Without them nothing would have happened. I must also say that we were doing a toy machine for airsoft, but not the BCC layout.
Moreover, we didn’t have an opportunity to watch a military prototype, because in out town power structures use only VAL and VSK-94, that’s why VSS did on the photos, available to everyone and with an eve to the combat VAL.
And if we compare the best airsoft AK and the military pattern, we will find many differences.
The point is that this machine gun is not piece-work.

The machine gun is made entirely of steel.
Butt: plywood
Fore: plastic
BCC is stained by two-component epoxi-based paint (there is a blued version)
Weight: 3.4kg with an eye
Basic speed: a basic BCC 130 m/s, but you can put anything you like (within there is herbox – standard AK, that’s why everything, which is suitable to AK, will suit BCC)
Length: 895mm
The number of balls in the store – bunker: 200, tavern on 68sht.
Power supply - LiPo AK type - in the trunk.
Mode of fire - automatic, single.

Photos:
















The process of assembly:







For construction:
Initially, we wanted to make everything from steel.
Body parts were laser cut from 2mm steel and welded to the conductor.
Thickness of the silencer: 1,5mm steel
Attachment fitting butt – a milled detail
The photo shows what we've got solid steel structure; as the saying goes, if you do not shoot, you can always hit - on the AC VAL, I think, in general, you can even hang.



Slide seal - steel 0,7mm
Translator, fuse, cap seal - steel 0,7mm
Rear of the cap seal is welded



The translator and the fuse are implemented mechanically - very reliable and easy.
The button of opening the cap seal is a milled detail (as all dribs and drabs – the button in the pivot, the base of rear sight, front sight).



Removing the silencer is implemented as in military pattern, by pressing the button on the fore end and twisting the silencer.
Fore plastic - milling



Store – a converted military – bunker – inside SIG552
We have already ordered test fur - will be molded from plastic – but with the Chinese details inside.
Now we actively investigate the possibility of filling herboks with the details of own making - but in any case will begin running-in - only then using in assembling ones for people.

Herboks slightly refined - removed all standard AC controls fire - replaced by the original ones.



An AP staff AK
Stalks: 430mm
AK type battery and lithium polymer in the barrel.

Photo of the aisoft BCC and combat SHAFT:








I should recall that we had made a toy for playing airsoft, but not the VSS layout.
Arksi
e-mail: arksi<AT>magnitogorsk.org
icq: 565-404-404