Feedback for mlbnyypaintballer - 1 (100%) Positive: 1 • Neutral: 0 • Negative: 0 Submit feedback for this topic

First and foremost, PLEASE read my thread rules:


1. I ACCEPT THE FOLLOWING FORMS OF PAYMENT:

*PayPal

*Money Orders (Postal Preferred)

and/or

* Cash (I suggest you only use this as a LAST resort; however, if you feel you must pay so in this fashion, please find a way to conceal the fact that the envelope contains money! I have seen plenty of “empty” envelopes supposedly containing money in my day; I have also been the victim of these so called “Wonders of the World”.

*LASLTY, Please do ask me to accept a check. I work in a grocery store, so I know what all it takes to verify the owner of checking account. I would need everything from your name, address, telephone number, and possibly driver’s license number. I am SORRY, but would rather not run the risk of this type of information getting lost in the mail and then you possibly having your identity stolen.

2. I ship off your items once your payment is received. Please, do not ask me to ship out an item and then you pay me once the item arrives to your doorstep. I have plenty of ways of proving to you that my items are in good condition and work (pictures/videos/ect).

3. All prices include USPS (United States Postal Service) Standard Shipping; if you want Priority shipping then add $5 to your total and you got it (I would recommend this/2-3 Day shipping for 1/3 of the price of UPS rates). PLEASE, KEEP IN MIND, IF YOU CHOOSE NOT TO UPGRADE TO PRIORITY SHIPPING; I AM NOT RESPONSIBLE IF YOU RECEIVE THE ITEM IN AN UNREASONABLE TIME FRAME. Also, if you want the item(s) to be insured, that will not be a problem; however, it will be at a cost to you. I also have no problem shipping with another carrier if you are not comfortable with the post office; however, I may need to charge a small shipping fee(ONLY $1-15 Depending on the Carrier).

4. Lastly, I am a 22-year-old business major, who has been involved in online transactions such as this for about 5 years now. I am mature and expect you to be as well, thank you!

Also, I have feedback all over the Internet, so don't be afraid to conduct business with me. You can find feedback for me in the following areas: airsoftforum.com (2 locations: (1st) listed on my profile page under the “comments” section (2nd) located in the link “ASF Feedback” in my signature), Pbnation.com (a website for paintballers-links located in signature), and Ebay. My account names are the same for every website, so don’t be afraid. YOU CAN TRUST ME; JUST LOOK AT THOSE COMMENTS!!!







I am the sole owner of this beauty and have taken good care of her. I purchased her on September 2, 2008 from Evike.com; I can get a copy of the purchase receipt if necessary. Since that time I have upgraded her extensively. As everyone can see I placed the following items on her: King Arms RIS, Guarder Grip, Rubber Sling, and King Arms “Special Forces” Mock Suppressor. She has seen a lot of use from me over the years; during that time she accumulated approximately 35,000 shots through her gearbox. I recently had to open her up due to the stripping of the motor shaft. Somehow the hollow portion of the pinion, which is the portion that rests on the shaft, stripped. This lead to the pinion gear spinning freely without catching and there rotating the gears. I took this time to open up the gearbox and re greased everything; to my surprise neither the gears nor the piston shown any real signs of wear. I BELIEVE WITHOUT A DOUBT THIS GUN IS READY FOR ANOTHER 35,000-50,000 SHOTS BEFORE ANY INTERNALS MUST BE REPLACED. Well getting back to the problem at hand, while trying to place in a new motor(Stock G&G Motor from a GR16 Plastic) I accidently stripped the plastic threads within the gun’s motor grip. In order to fix the problem and prolong the life of the next grip, instead of placing your standard “plastic threaded” grip back on the gun; I placed a G&G grip. I am sure most of you know by now the G&G grips have metal threads on their motor grips. Anyways, I placed the motor and grip inside the gun and she runs just as smoothly as the day I got her. The only problem with her now is this (However, it has been a problem since receiving her from evike. It never really gave me any problems, but I must tell you guys all the same.) : If you flip the gun from safe to semi (90 degree angle), the gun will remain in safe mode; however, if you move the selector switch just pass the semi point, and then move it back to semi… It fires in semi auto without any complications what so ever. The gun has been like this from day one. I HAVE A VIDEO DOWN BELOW TO SHOW YOU GUYS EVERYTHING I SPEAK OF.




I do not play at a licensed field; due to the fact that there are none around me. So, I have to resort to playing in the 4 acres of woods behind my house. We normally have a group of about 6-12 people, which normally includes my girlfriend and several other close friends. During the beginning, we just used the woods/brush as cover, now however, we have cut down a lot of brush in order to make bunkers and such; we also created a large “5 Man” base out of tarp. So, now I am running into the following problems: (1) I must resort to being the support man seeing as I cannot maneuver around bunkers near the opposing base. (2) I also cannot run in the base and take out the enemy seeing as my gun has a M130 in it.

I know I could simply drop a M110 or M120 in the gun to fix my second problem; however, this would not fix my first problem. As much as I hate to do this, seeing as how much I have enjoyed this gun, I believe the time has come for me to sell her and purchase an M4. FELLAS, this would make someone an awesome gun or even ONE HELL OF A DMR. During her time with me, I have accumulated 15-20 (I stopped keeping count after 15) confirmed 175-200ft kills; CLOSE TO HALF OF THOSE WERE 1 SHOT 1 KILL (KEEP IN MIND, I use .30g BBs for Maximum Accuracy). This gun would make someone an amazing DMR if you simply put a 6.01mm Tight bore barrel in it.


1. KWA M16BR w/ Original Box, Manual, and spare parts (fuses and such)
2. 9.6V 4200 Mah Battery
3. King Arms RIS w/ Guarder Grip
4. UTG Bipod
5. King Arms "Special Forces" Mock Suppressor
6. Original Handguard Parts
7. Original KWA 300rd High Capacity Magazine

(Package A)-Everything You see Listed. $275

(Package B)-The Original Gun (No Battery, Bipod, RIS, Vertical Grip, or Supressor). $190


(Package C)-If You’re looking for another package just tell me what you want and offer up based on the prices above. $???









1.CYMA 030 GlOCK AEP w/ Original Rail, and Sights
2. 2 7.4V Batteries
3. 4 Standard Magazines
4. 1 High Capacity Magazine
5. Upgraded Rail System
6. Wall Charger
7. UTG Woodland Right Leg Holster
8. 1000-2000 .23g Matrix BBs (I will place them in a bag, because I would like to keep the tub.)

(Package A)-Everything You see Listed. SOLD

(Package B)-The Original Gun (1 Battery, Charger, 1 Standard Magazine). SOLD


(Package C)-If You’re looking for another package just tell me what you want and offer up based on the prices above. SOLD




1. 8.4v 1700mah NiCad Battery (Missing the actual battery connector; however, it still works just fine[I tested it just before posting])$4
2. Large Handguard for Mp5s/Has the ability to hold large batteries (Will come w/ a free Small Battery 2 Large Battery Connector, Manual, Box, & All Its Original Tools.) $32
3. ICS Airsoft Elite Mp5 VII Mechbox (Includes: Both sides, screws, selector switch & cut off lever w/ screw/Saw Maybe 500 shots-NO CRACKS OR WEAR WHATSOEVER!!!!) $20
4. KWA M16BR Handguard w/ Rod (Never Seen the Field of Play) $20
5. 229mm(Mp5 Length) 6.03 Prometheus Tight Bore Barrel $35
6. KWA M16BR Delta Ring (Never Seen the Field/Play) $10
7. Mp5 Flash Hider (THIS WILL NOT FIT THE SD EDITIONS!!!) $5
8. ICS Metal Mp5 Dual Magazine Clamp $10
9. ICS Mp5 SD Front Receiver (Includes Upper Receiver, Front Sight, & Cocking Tube: NO SPRING) $15
10. Black Pasgat Helmet w/ Woodland Cover $12
11. (4) Star 30 Rnd Low Cap Mp5 Mags (Used 1 Time a Piece, just not my thing.) $6.50 Together OR $2 Each
12. Matrix .40g bb Tubbs(Each contains around 1000 or so)-$7 Each or $12 For Both
13. ICS Mp5 3-Point Sling w/ Large Foam Pad(Taken off a Gym Bag-MAKES THE SLING A LOT MORE COMFORTABLE ON YOUR SHOULDER!!!) $10
14. Mp5 Claw Rail Mount (Rarely Used, but a very nice rail... This allows you to use your iron sights as well as a red dot.) $12


(G&G GR16 Plastic Series Part Out)
1. Charging Handle w/ Spring $12
2. Carrying Handle $15
3. Hop Up Bucking w/ Barrel Sleeve(I will include the Barrel Sleeve w/ Either the Inner Barrel or Hop Up Bucking; Depending On Which Sells First) $5
4. Inner Barrel – 6.05 X 357mm $10
5. Ejector Button $5
6. Motor Grip Screws $2
7. Magazine Catch $12
8. Bolt Stop $7
9. Selector Switch w/ Screw (NO SELECTOR PLATE) $7
10. Body Pin Set $7
11. [ACCIDENTLY SKIPPED THIS NUMBER, LOL]
12. Hop Up Remains (6 Parts) $3.50
13. Dust Cover Assembly $11
14. Lower Body $25
15. Back Plate/Stock Plate (I will include this with the stock if someone purchases it before this thing sells.) $5
16. Bolt Cover $4
17. Stock w/ Buffer Tube $25
18. Handguards $10


1. G&G GR16 Plastic Series Outer Barrel Assembly $35
2. G&G GR16 Plastic Series Complete Gearbox (Never Opened, ONLY SEEN 2000 Rounds)GONE SOLD TO JOEH M4



1. DBoys M4/M16 Front Sling Adaptor (NEVER USED/INSTALLED) $15
2. ICS Mp5 Motor Plate w/ Screws $10
3. ICS Mp5 Motor Plate w/ Screws $8
4. SOLD
5. ICS SW5 SEF Selector plate $3
6. Gearbox Switch Assemblies (VII) $3.50 ea.
7. CA M16 Selector Switch $8
8. SOLD
9. SOLD
10. ICS MP5 Hop-Up set (NO BUCKING) $8
11. ICS SW5 Inner Barrel Clamp $5
12. ICS SW5 Series Hop Up bucking $5
13. SOLD
14. ICS SW5 Trigger $5
15. Stock ICS Mp5 VII Piston Head $5
16. SOLD
17. SOLD
18. SOLD
19. Guarder Poly Carb Piston (Never Used-VII) $12
20. Used CA High Torque Motor $25
21. SOLD
22. CA M16 VII Cylinder/Head Set $9
23. ICS Mp5 VII Cylinder/Head Set $16
24. CA M16 Tapplet Plate/Air Nozzle Set Tapplet Plate Gone-$3 for the Nozzle
25. ICS Mp5 Tapplet Plate/Air Nozzle Set $9


1. CA M16 Rear Motor/Battery Wire Remains $2.50
2. SOLD
3. ICS M16 Rear Motor/Battery Wire Remains $2.50
4. Random Motor/Battery Wire Remains $0.50


http://www.theghilliesuits.com/SYN-NMS.html
(I am 6 feet 2 inches tall with a weight of 155 pounds, & it fits me just right; keep in mind I like my airsoft gear to be just slightly big.)
1. Ghillie Head Net-$10
2. Ghillie Jacket-$45 OR ALL THREE FOR $85
3. Ghillie Pants-$45


1. Woodland Ghillie Gun Wrap-SOLD
2. Matrix .40g bb Tubbs(Each contains around 1000 or so)-$7 Each or $12 for both

Thank you for everyone’s time, and hopefully business; if anyone needs more information/pictures/videos for an item, PLEASE feel free to pm me or post your concerns. I will check this thread daily and will answer any and all responses as soon as possible. Thank you again and G0D BLESS!!!

This post has been edited by mlbnyypaintballer: Jan 25 2010, 10:24 PM

If you appreciate our Buy-Sell-Trade forums here, please or upgrade your account to help us out. If you can not help us financially, then at least help us by telling a friend about us, share us on your favorite social networking website or check out our affiliate program (coming soon). To hide this request and these ads, log in and change to another forum skin.


front sight post is on backwards! for some reason it looks good like that though

Im intrested in the Cm.030 handgun package. PM me for my info

Haha, I was wondering if anyone was gonna notice that. JUST SO EVERYONE KNOWS, YES, THAT WAS DONE ON PURPOSE AND HERE IS WHY:



If you look closely, you can see that the sling adaptor is on a free swinging swivel(A single pin going through the sling adaptor keeping it in place). This allows the sling adaptor to swing completly forward and/or backward; however, here lies the problem. The free swinging swivel allows the sling adaptor to knock up against the RIS while the operator is crawling/running/walking. I never had this problem seeing as I used the Flip Up Front Sight for M16/M4 Series AEG from evike.com(SORRY, but this is not for sale seeing as I plan to keep it for my KWA KM4RIS).

I placed the sight that way simply for the comfort of its new owner(or at least I thought it was gonna have a new owner, lol).

ALSO FELLAS THE FOLLOWING ITEMS ARE SPOKEN FOR BY TWO INDIVIDUALS UNTIL MONDAY:

CYMA 030 Glock AEP Package

Offer up on the rest!

The following items are now sold:

CYMA 030 Glock AEP Package = EVERYTHING

Ghillie Rifle Wrap

BUMP FOR THE REST!!!

This post has been edited by mlbnyypaintballer: Jan 25 2010, 10:22 PM

THE FOLLOWING ITEM IS ON HOLD FOR TILL LATE NEXT WEEK:

ICS Mp5 SD6 Front Receiver/Cocking Tube

9.6V 4200Mah Nihm Battery(The One that comes with the M16)

TTT!

This post has been edited by mlbnyypaintballer: Jan 27 2010, 05:11 PM

Still lookin to offload the rest... Offer Up!

You have a PM about the M16.

6. KWA M16BR Delta Ring (Never Seen the Field/Play) $10 - Is this a complete delta ring set? If so, will take.
17. Stock w/ Buffer Tube $25 - Will this one fine any M4? If so, will take it. I know ICS versions don't.
18. Handguards $10 - Definitely take

This post has been edited by Hack73: Jan 30 2010, 10:58 PM

if you still have this I am very interested

THE FOLLOWING ITEM IS NOW GONE:

9.6v 4200mah Nimh Battery (THE ONE THAT WAS SUPPOSE TO COME WITH THE M16)

Also, everyone has pms.

Except for you, Really Cool hippo.

Hit me up with a pm with exaclty what it is your interested in, thanks.

UP FOR THE REST!!!

This post has been edited by mlbnyypaintballer: Feb 3 2010, 06:38 PM

(Package A)-Everything You see Listed. $250

(Package B)-The Original Gun MINUS DELTA RING(No Battery, Bipod, RIS, Vertical Grip, or Supressor). $175


(Package C)-If You’re looking for another package just tell me what you want and offer up based on the prices above. $???

PLEASE HELP ME GET THIS THING SOLD!

THE FOLLOWING ITEMS ARE NOW GONE:

17. Stock w/ Buffer Tube $25
18. Handguards $10
6. KWA M16BR Delta Ring (Never Seen the Field/Play) $10
10. Black Pasgat Helmet $12 (Woodland Cover is STILL HERE - Now $3 Shipped)

I AM NOW CONSIDERING PARTING OUT THE M16(Externals and Internals); SO, OFFER UP IF YOUR INTERESTED IN SOMETHING!!!

ANOTHER PRICE DROP!

THE ENTIRE KWA M16 PACKAGE for $225 shipped! UP!

No interest at all?!

im interested in buying the rail system, and or a mag. I posted on your pbnation wall, if you could pm me there, that would be great. thanks!

Sent you a pm on here hangloose, bc my pming is down on that site for some reason!

Well fellas, it looks like the gun will be parted out so offer up on everything!

Okay Fellas the Following Items Just Sold:

King Arms M16 RIS
KWA M4/M16 Highcap Magazine

I Sold both to hangeloose for $42 Shipped.

The Following is What I would Like to Get For Parts on The M16:(ALL PRICES INCLUDE SHIPPING)

* KWA Version II Non 2G Gearbox(35,000 Rounds-I Can Get Pics Of Internals For Any Serious Buyer If Needed) $65

* KWA 2 Piece Hop Up Unit w/ Bucking $17

* Entire Body(Upper, Lower, Outer Barrel, Stock, Pins, Mag Catch, ect.../Basically everything except the guts[inner barrel, motor, gearbox, hop up unit] $120

* Upper Body(includes everything on/in this portion of the body/charging handle, carrying handle, dust cover, ect..) $40

* Lower Body(includes everything on/in this portion of the body/Mag Catch, Bolt Catch, Motor Grip w/ Screws, ect..) $35

* Outer Barrel(Outer Barrel with Allen Screws, M4/M16 Front Sight w/ Sling Loop, Orange Flash Hider, ect...) $30

* Stock(includes everything on/in this portion of the body/Butt Plate, Screws, Rear Sling Adaptor, Battery Wires WILL BE INCLUDED WITH THE GEARBOX UNLESS REQUESTED ect..) $20

* G&G GR16 Plastic Motor w/ Less Than 2500rds $23

* King Arms "Special Forces" Suppressor(Modded to Actually Suppress Shots To An Extent By Myself-I will Post Videos On My Next "BUMP" Post Tomorrow) $25

* Black Rubber Sling From Wal-Mart $10

I CAN GET PICTURES OF EVERYTHING UPON REQUEST; HOWEVER, IF THERE SEEMS TO BE ENOUGH INTEREST I WILL JUST GETS PICS OF EVERYTHING NOW. SO, let me know what you guys want and thankyou for looking, G0D BLESS!!!

No one want anything?

Received all my parts today. Great response & service. Thanks again!

Here are pics of the M16 Parts:

Pics

ALSO, KEEP THIS IN MIND: I decided to keep the pistol grip due to its durability. Due to this the following items/packages prices have dropped:

- Entire Body $115
- Lower Body $30

No one want anything off the M16?

Do you still have the mock silencer? If so, what is the length?

.4g bbs are mine

Sorry Hack, but the Supressor was sold locally.

Also, you are correct Milith, lol.

Also, the 4 Mp5 Low Caps are now gone as well!

Up, for the rest!

Pm inbound

Pmed Replied to!

ALSO, MILITH, IF YOU HAPPEN TO CHECK THIS THREAD, YOU NEED TO CHECK WHO YOU SENT THE PAYPAL MONEY TO AGAIN BC IT ISN'T SHOWING UP ON MY ACCOUNT THAT YOU SENT ME ANYTHING. I also have no emails from paypal either.

Up for the rest guys!

Okay fellas the following items are now sold:

CA M16 Cylinder (I still have the Cylinder Head/I will take $4.25 shipped for this item.)
Matrix .40g Bb Tubs

Here are some items I am adding:



1. BRAND NEW NCstar High Rise Scope Mounts w/ 30mm Red Dot Inserts = $20
2. BRAND NEW NCstar Universal Barrel Mount for Bipods = $25
3. UTG Ergonomic Vertical Tactical Foregrip = $15
4. King Arms Light Weight Slim Mock Silencer - 30 X 110mm (Special Force)[Modified to work better by myself/I can get you a video of this if requested) = $30




Woodland Bijan Size Medium Knee & Elbow Pads
(BRAND NEW-PURCHASED AND THEN DECIDED TO STICK WITH MY PB PADS BEFORE I EVEN TRIED THEM OUT)
Elbow Pads = $15
Knee Pads = $25





King Arms Flip up Front Sight Tower for M4 / M16 Series Airsoft Rifles w/ JBU Detachable Sling Swivel $45

Well fellas, help me get this new and old stuff sold!!!

Up, also some items have been added to SOA!

YGPM

What cylinder head do you have?

Pms replied to!

Sorry about the late responses, I was diagnosed with the flu yesterday!

Also, Hack if your referring to my message about two or three above you, if is the Classic Army From A M16.

Anyways, up!

TTT!!!