Help - Search - Members - Calendar
Full Version: JG AUG Barrel Removal?
Airsoft Forum > General > General Discussion
Beprepared
I just bought the Military (integrated optic) version of the JG Steyr AUG. I have seen LOTS of posts about removing the outer barrel on AUG type airsoft guns, but I can't find any about the JG specifically.

The dealer that I bought it from tells me that it can't be removed, but I am hoping he's wrong...

What I'd like to do is remove the outer barrel, take the flash hider off the end, and put it on the place where the barrel meets the reciever... can anyone tell me if I can do this, and if so, how it will affect my rifle?

I want it to look like this

garret218
In case you didn't know, the JG AUG is a clone of the TM AUG. So any guide you found on the TM would work for your JG as well, but I still got your back. a-thumbsup.gif

First, remove the pin holding in the front grip. When you do the spring inside the grip may shoot towards the bottom of the grip so put pressure on the bottom cap when you remove the pin. Once you remove the grip you should see an allen scew. Unscrew it until you can slide out the outer barrel. Be aware though that the silver thing (not sure what it is) on the gas block may fall out. Then you need to get one of these:
http://www.airsoftgi.com/product_info.php?products_id=4301
Put that in where the outer barrel goes and tighten the allen screw. Take off the flash hider from the original outer barrel and put it on the adapter. Put the grip back on and you're almost done. If you don't want the inner barrel to be sticking out then you'll need to buy a 363mm (m4 length) inner barrel. Once you install the that then you're good to go!
Beprepared
QUOTE (garret218 @ Mar 3 2010, 02:09 PM) *
In case you didn't know, the JG AUG is a clone of the TM AUG. So any guide you found on the TM would work for your JG as well, but I still got your back. a-thumbsup.gif

First, remove the pin holding in the front grip. When you do the spring inside the grip may shoot towards the bottom of the grip so put pressure on the bottom cap when you remove the pin. Once you remove the grip you should see an allen scew. Unscrew it until you can slide out the outer barrel. Be aware though that the silver thing (not sure what it is) on the gas block may fall out. Then you need to get one of these:
http://www.airsoftgi.com/product_info.php?products_id=4301
Put that in where the outer barrel goes and tighten the allen screw. Take off the flash hider from the original outer barrel and put it on the adapter. Put the grip back on and you're almost done. If you don't want the inner barrel to be sticking out then you'll need to buy a 363mm (m4 length) inner barrel. Once you install the that then you're good to go!


okay, that is certainly good info... a few questions.

first, is there a specific barrel that I need to buy to fit that gun, or will any barrel that length work? Also is there a high quality one you could recommend?

second, is there a cheaper version of that adapter, or is the $35 one the only one available?

third, are there any other upgrades for this gun that you would say will have a significant impact on performance or durability? I'm not going to be doing huge competitions with it, but I'd like it to be dependable
garret218
I found the same adapter for $19 on a different website:
http://www.airsoftpost.com/product_info.ph...oducts_id=28336

Any after market barrel will fit as long as itís 363mm in length. If youíre on a budget I recommend a Madbull tightbore barrel. I own one and it improved the accuracy of my gun significantly.

Another cheap upgrade I would recommend is a Systema hop up bucking. I have these in a few of my guns, and after broken in they increase your guns range considerably. Iíve heard that pairing the Systema bucking with an SCS nub will also improve your gunís range and accuracy.

If you havenít already, I suggest using a 9.6V battery. It will increase your gunís rate of fire and improve trigger response. With an easy mod you can get this Intellect 9.6V 2000 mAh battery to fit. You can run a 9.6V battery in a stock JG for a while, but I would recommend eventually upgrading to a metal spring guide and metal bushings for durability.

The only other ďupgradeĒ I can think of is high quality 0.25g BBs. I use Airsoft Elites, G&Gs, and KSCs and I recommend either one. Any and all of these upgrades will improve your gunís performance. The best part about all of these upgrades (save the metal spring guide and metal bushings) is that you can install them without opening up the gearbox! If you want to upgrade your gearbox, then that's a whole new post..

Good luck!
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2014 Invision Power Services, Inc.
CommunitySEO 1.2.3 © 2014  IPB SEO Module