Hmmmmm...



I seem to be at am impasse with which part to purchase

I am running a utg l96 with a pdi hop up, mad bull .43s and a 6.03 tbb.

I do not have an end cap for the barrel to keep it in one place at all times

I have found these items but I am not sure which will have the same threads measurements as the barrel





Spartan Doctrine $7
King Arms $15

Any advice?

I have the PDI one, and it works fine.

You mean this one?

http://www.airsoftatlanta.com/PDI_Type_96_..._CW_p/66232.htm

I saw this but its clockwise
wanted to find ones with counterclock

Well I ordered this one

https://www.airsoftatlanta.com/ProductDetai...oductCode=66282

Please report if it works or not, I'm looking to build a super quiet L96 and would like to know which thread adapter will work with the UTG threads.

will do

Well the cap arrived today and it was more or less a success. It got its job done with only one problem. The threads on the cap were a bit too big and the threads on the barrel were a hair too small. After some wrenching, I got it in to only a couple mm sticking out.