The are some of the newest ASF topics, updated every 15 minutes. http://www.airsoftforum.com/board/forums.html Fri, 10 Feb 2012 22:48:47 -0600 15 http://www.airsoftforum.com/board/Tap-Need-t239320.html So I am experimenting in the machine shop making Flash Hiders, and I have a couple great looking designs. However I can only tap them CW and Imperial... I realize that I need a metric 14mm CCW tap, however I do not know what pitch I need. There is 1, 1.5, and 2 that I am aware of, and I would really like to know for sure what pitch I need before I buy one. I would also like to know what metric drill size I would need.

PLEASE HELP ME OUT!!! THANKS!!! ]]> Fri, 10 Feb 2012 20:01:19 -0600 http://www.airsoftforum.com/board/Tap-Need-t239320.html http://www.airsoftforum.com/board/Dilemma-t239319.html Fri, 10 Feb 2012 19:55:45 -0600 http://www.airsoftforum.com/board/Dilemma-t239319.html http://www.airsoftforum.com/board/instantaneous-trigger-r-t239291.html In the gearbox currently:
- Somewhere around an M100 spring
- Red full metal 16 tooth piston (cant remember brand)
- System silent piston head and cylinder head
- Upgraded steel gears. 16:1 Ratio.

So with a 11.1v battery, element high speed motor, and current gearbox specs, am I going to get a instant trigger response and am I going to run into any problems? Any suggestions? I know I can go the whole short stroking and get smaller aspect ratio gears, but again, high ROF is not necessarily my goal.

Thanks for your time guys!]]> Fri, 10 Feb 2012 18:59:53 -0600 http://www.airsoftforum.com/board/instantaneous-trigger-r-t239291.html http://www.airsoftforum.com/board/AUG-jing-gong-internals-t239277.html It came whit a plastic orange flashider wich can´t be removed whit the traditional way (hexagon screwdriver).

But my question is not about the flashider, it is about the aug internals.
I know that jing gong started to put some new internals to theyr aegs, and I saw a few review about the newest internals (metal shims, bushigns, etc).
Does anyone know sens wen JING GONG started to use the PLASTIC ORANGE FLASHIDER on theyr aegs?, Or it is just for the country?.

The reason why I´m asking is because maybe they started to use the plastic flashider sens 2010-2011 (newer versions) and that will save me some mone (no need to upgrade).

THANKS A LOT!

PS: My aug came whit a serial nomber on one side.]]> Fri, 10 Feb 2012 12:07:28 -0600 http://www.airsoftforum.com/board/AUG-jing-gong-internals-t239277.html http://www.airsoftforum.com/board/MK36-Accuracy-issue-t239270.html Fri, 10 Feb 2012 00:46:00 -0600 http://www.airsoftforum.com/board/MK36-Accuracy-issue-t239270.html http://www.airsoftforum.com/board/KWA-get-t239266.html OK. I am torn between 2 guns made by KWA. NOTE: I am on a budget of abour $500 a couple years ago I sold off my airsoft items because I needed money now I want to get back to playing. So I am buying new tac vest, battery, charger, Sidearm, Drop thigh holster, flashlight, vertical grip, extra mags and of course the AEG. Which do you guys recommend KWA KM4 RIS $365 or KWA G36C $28 both are 2GX. I do get the extra 19% off my entire purchase through evike.com So give me your feedback I will be happy to have it. shipping is average of $40. Thu, 9 Feb 2012 23:36:56 -0600 http://www.airsoftforum.com/board/KWA-get-t239266.html http://www.airsoftforum.com/board/KWA-KM4-RIS-t239262.html http://www.evike.com/product_info.php?cPat...oducts_id=29140
but not sure if it will fit. so then I figured maybe ill just buy a battery like this http://www.evike.com/product_info.php?cPat...oducts_id=32606 and just fasten it to my crane stock externally. I looked into some peq's but they are just too expensive. maybe you guys can point out a website to buy batteries from that arent quite as expensive? I once came across a website that allowed u to "build" your own batteries to your specifications they company would make them and ship them to you and they were nicely priced... I regret not bookmarking the webpage. anyways thanks in advance for the input. Oh lastly a nice little inexpensive smart charger would be nice too thanks a lot.]]> Thu, 9 Feb 2012 22:40:29 -0600 http://www.airsoftforum.com/board/KWA-KM4-RIS-t239262.html http://www.airsoftforum.com/board/airsoft-bigger-paintbal-t239258.html
btw one of the airsofters said it, so I was thinking it's just an opinion... it would be cool to find out that it is true though... if you have any info, please share :)]]> Thu, 9 Feb 2012 21:40:24 -0600 http://www.airsoftforum.com/board/airsoft-bigger-paintbal-t239258.html http://www.airsoftforum.com/board/Fixed-hop-up-t239257.html What does it mean if the hopp up is fixed ,does that mean it cant be adjusted? Thu, 9 Feb 2012 20:35:08 -0600 http://www.airsoftforum.com/board/Fixed-hop-up-t239257.html http://www.airsoftforum.com/board/226-Compatabilty-t239234.html
http://www.evike.com/product_info.php?products_id=31989 (Seems like bad metal)

Or this RIDICULOUSLY-LUDICROUSLY-OVERPRICED-SMALL piece of steel for 21$!

http://shop.ehobbyasia.com/shooters-design...rt-p226-32.html

Im looking for a part that wont break soon, but is the premium for the steel worth it?

Pat]]> Thu, 9 Feb 2012 18:56:28 -0600 http://www.airsoftforum.com/board/226-Compatabilty-t239234.html