Welcome Guest ( Log In | Register )

airsoft forum and discussion board

to add your 468x60 banner, pay ad zone 1
Click Here for the Advanced ASF Search Tool
website template selector
268 Pages V   1 2 3 > » 

KrYpTiK
Posted on: Aug 19 2008, 06:53 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


QUOTE (MooCowofDom @ Aug 19 2008, 02:00 PM) *
Are silent piston heads practical in high speed setups or do they get ripped up more easily?

On a completely different topic, is using Helical pistons with Helical gear sets necessary?


The silent piston head will actually be a good choice for that setup, as a high speed setup puts a lot more stress on the piston/piston head. Since the silent heads have a depression in the center, it will slightly slow down and cushion the impact of the piston to the cylinder head. You should be fine with that setup.

Depends on which gearset you are using. Some gearsets are "true" helical gearsets, needing the helical piston (these include the systema helical super torque and anything above that). The piston has smaller teeth which prevent interference with the gearset. If you run a more common helical gearset, with a standard ratio, you should be able to use a standard piston.
  Forum: Upgrades & Modifications · Post Preview: #17817999 · Replies: 2 · Views: 733

KrYpTiK
Posted on: Aug 18 2008, 01:01 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


QUOTE (SVT98driver @ Aug 11 2008, 08:40 PM) *
I like the real 552 Kryptik a-grin.gif .

And does she still look the same from back over a year ago?


Hasn't changed a bit, I'm thinking of breaking the gun down soon and refurbishing the gearbox, after a year of sitting new grease and a spring would bring it back to life.
  Forum: Airsoft Replica Photos · Post Preview: #17816050 · Replies: 36 · Views: 4,427

KrYpTiK
Posted on: Aug 8 2008, 07:42 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Use gun cleaning pads (small 1"x1") used to clean real steel fire arms. Put those on the end of the cleaning rod supplied with your gun, spray some silicone oil (100%) like the others said. Best way in my opinion is to clean the barrel out of the gun, but that isn't the most practical way to do it.
  Forum: Upgrades & Modifications · Post Preview: #17805207 · Replies: 11 · Views: 1,367

KrYpTiK
Posted on: Aug 8 2008, 07:40 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


The reason your gun goes fully auto as soon as you hook up the battery is because the gate input on the MOSFET is receiving unswitched voltage. You need to run a small positive wire AFTER the trigger switch that goes to the gate lead. Use a multimeter or test light to figure out which terminal has voltage as soon as the battery is connected (that is going to be the terminal you do not use). Any other questions shoot me a PM.
  Forum: Upgrades & Modifications · Post Preview: #17805205 · Replies: 49 · Views: 15,844

KrYpTiK
Posted on: Aug 8 2008, 07:35 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


They work fine and allow you to run a fairly large battery without much modifications.

Easiest way to route the wires would be to make a hole in the plate which lies in between the gun body and the stock tube.

As long as realism isn't a big concern this is the most practical solution in my opinion, as crane stocks are annoying and the connections between the three rows of cells eventually come apart.
  Forum: Batteries · Post Preview: #17805201 · Replies: 1 · Views: 546

KrYpTiK
Posted on: Aug 8 2008, 07:25 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


QUOTE (CSI416 @ Jun 10 2008, 05:53 PM) *
looks like King Arms 10inch Free Floating RAS (Troy Industrie replica).


Indeed

QUOTE (Koko_Krisp89 @ Jun 11 2008, 01:13 PM) *
He actually still has his m4 but has sold off his other guns. He'll still do repairs and upgrades to guns too, just contact him through AIM or pm him.


I still have my G3 as well, never found a buyer. Will still sell.
  Forum: Airsoft Replica Photos · Post Preview: #17805189 · Replies: 36 · Views: 4,427

KrYpTiK
Posted on: Feb 26 2008, 11:46 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Bump!
  Forum: Airsoft Items For Sale · Post Preview: #17622597 · Replies: 12 · Views: 1,382

KrYpTiK
Posted on: Feb 19 2008, 10:11 AM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Bump.
  Forum: Airsoft Items For Sale · Post Preview: #17613976 · Replies: 12 · Views: 1,382

KrYpTiK
Posted on: Feb 17 2008, 01:54 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Up.
  Forum: Airsoft Items For Sale · Post Preview: #17612106 · Replies: 12 · Views: 1,382

KrYpTiK
Posted on: Feb 16 2008, 12:53 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Price drop to $700 shipped and I will accept offers.

I've put not only a LOT of cash into this gun, but I've also put a lot of TIME into building this gun, to make everything work as it should and so on.

Thanks for the comments guys.
  Forum: Airsoft Items For Sale · Post Preview: #17611187 · Replies: 12 · Views: 1,382

KrYpTiK
Posted on: Feb 14 2008, 04:39 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Bump.
  Forum: Airsoft Items For Sale · Post Preview: #17609805 · Replies: 12 · Views: 1,382

KrYpTiK
Posted on: Feb 13 2008, 09:36 AM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Bump.
  Forum: Airsoft Items For Sale · Post Preview: #17608821 · Replies: 12 · Views: 1,382

KrYpTiK
Posted on: Feb 12 2008, 09:27 AM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Bump.
  Forum: Airsoft Items For Sale · Post Preview: #17607919 · Replies: 12 · Views: 1,382

KrYpTiK
Posted on: Feb 10 2008, 01:22 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


There is a small spring that hold the cocking lever sideways to the body, that spring isnt there so it wobbles slightly. Does not affect the operation of the gun and is hardly noticeable.

Bump.
  Forum: Airsoft Items For Sale · Post Preview: #17606358 · Replies: 12 · Views: 1,382

KrYpTiK
Posted on: Feb 9 2008, 08:39 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


I am selling this great condition originally-TM G3 SG/1.

Externals: It has a very high quality G&G Magnesium receiver that I put on, this item is hard(er) to find, but is higher quality than the CA receiver in my opinion. Along with the receiver it has a CA metal cocking tube, which adds high strength gun and solves the flex issue common on long G3's. Along with that I put on a G&G Magnesium RAS system which cost a good $150-$200 alone. Includes the front RIS grip and metal low-profile scope mount. The rear sight is missing a small screw so it does not stay adjusted, and the front cocking tube lever is missing a small spring so it bounces a tad, but otherwise everything works perfectly. Furthermore I have some aftermarket pins holding the thing together which are much stronger than the stock TM ones.

Internals: The internals are what make this gun truly shine. I have custom installed a custom GP 10.8v 2200mah pack using 4/5SC cells, originally made by cheapbatterypacks.com. These cells are out of production now, and are very high quality. There is a Systema Dual MOSFET inside, that allows the 10.8v to run cleanly and efficiently without having to worry about your trigger points burning up. The gun is shooting in the range of 400-420 feet per second, but can handle much more. Parts list:

TM EG1000
PDI 170% Spring
Prometheus Standard Gears
Solid Bushings
Guarder Polycarbonate Piston
Systema Spring Guide
Systema Polycarb Piston Head
Systema Metal Cylinder Head
Systema Type-0 polished Cylinder
Systema Air Nozzle
Systema Tappet Plate
Systema Spring Set
Reshimmed recently and new grease
New Silicone Insulator Wiring
Deans Connectors
Systema Hopup Bucking
Systema 6.04mm Tightbore Barrel
Systema Dual MOSFET system

So essentially the box is built throughout.

Pictures:





I am selling this gun because I need cash for a new transmission for my Camaro. Otherwise I would definitely have kept it because it is one of the pride and joys of my collection, a long-time project. I am going to ask $750 for it but am willing to go lower, so all offers will be considered.

Gun also includes the Battery that was specified earlier and a Hi-Cap magazine (with green magpul).

Terms:
I will ship the gun via UPS ground unless you request a different shipper/service.
I accept paypal.
The gun will be sold as is, I am not offering a warranty on it because I cannot be responsible for how you treat it. I can assure you that it operates smoothly and properly.
NO Trades please.
Contact me via PM or AIM, thanks!
  Forum: Airsoft Items For Sale · Post Preview: #17605956 · Replies: 12 · Views: 1,382

KrYpTiK
Posted on: Aug 17 2007, 09:11 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Bump. Price is now $320 + Shipping.
  Forum: Airsoft Items For Sale · Post Preview: #17462903 · Replies: 9 · Views: 1,583

KrYpTiK
Posted on: Aug 14 2007, 04:08 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


To the top.
  Forum: Airsoft Items For Sale · Post Preview: #17461497 · Replies: 9 · Views: 1,583

KrYpTiK
Posted on: Aug 12 2007, 12:34 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Bump.
  Forum: Airsoft Items For Sale · Post Preview: #17460045 · Replies: 9 · Views: 1,583

KrYpTiK
Posted on: Aug 11 2007, 05:56 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Bump.
  Forum: Airsoft Items For Sale · Post Preview: #17459378 · Replies: 9 · Views: 1,583

KrYpTiK
Posted on: Aug 10 2007, 06:33 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Bump, remember I'm taking trades and the price is OBO.
  Forum: Airsoft Items For Sale · Post Preview: #17458352 · Replies: 9 · Views: 1,583

KrYpTiK
Posted on: Aug 9 2007, 10:07 AM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Bump, thanks bro.
  Forum: Airsoft Items For Sale · Post Preview: #17456988 · Replies: 9 · Views: 1,583

KrYpTiK
Posted on: Aug 8 2007, 12:38 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Bump.
  Forum: Airsoft Items For Sale · Post Preview: #17456233 · Replies: 9 · Views: 1,583

KrYpTiK
Posted on: Aug 7 2007, 09:44 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Description:

For sale and/or trade is a great condition Classic Army SLR-105 with black furniture. This gun has not seen much action, and the externals/internals are in very good condition. I installed a G&P Metal forward receiver to replace the classic army plastic forward receiver. This makes the gun truly "full metal" and gives it a better feel. Also installed are a guarder piston and guarder piston head (this one works very well), systema high speed gears, and I have adjusted the motor and shims, and have re-lubed the gun. I have also installed deans connectors.

Accessories Included:

-Pristine MAG 3000 round drum magazine (auto-winding). You also get the 2500 AE .25g bbs inside the mag. Costs $145 new at AEX.
-CA 500 round AK74 Hicap.
-Bolt on Bipod if you want it
-8.4v 3300mah battery w/ deans connectors installed.

I will also include a deans-to-large tamiya charger adapter if your charger does not support deans connectors.

Trades:

-TM M1911
-Certain M4's/M16's, offer away
-Possibly SCAR-L
-Multicam Items
-Exotic/interesting items
-Some small things like M4 mags and crane batteries can offset a bit of cost.
-Cash a-grin.gif
-Anything else, feel free to offer.

Looking for $350 + Shipping initially. Price is OBO. Feel free to offer. No lowballs.


Rules:

Paypal and USPS Money Order payment only. Include 3% Paypal fee if buying.
I will ship via UPS ground and will provide you with tracking information.
Contact me through PM or AIM at mattbez22

Pictures:



  Forum: Airsoft Items For Sale · Post Preview: #17455459 · Replies: 9 · Views: 1,583

KrYpTiK
Posted on: Aug 3 2007, 03:07 AM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Bump. Also have a Crye Combat Shirt for sale on ebay let me know if you want the link.
  Forum: Airsoft Items For Sale · Post Preview: #17451227 · Replies: 7 · Views: 2,272

KrYpTiK
Posted on: Aug 1 2007, 12:08 PM


I chooses to drive traficks.


Group: Elite
Posts: 6,433
Joined: 9-January 06
From: Los Angeles, CA
Member No.: 17,437


Bump.

Pads and Boonie Sold.
  Forum: Airsoft Items For Sale · Post Preview: #17448685 · Replies: 7 · Views: 2,272

268 Pages V   1 2 3 > » 

New Posts  New Replies
No New Posts  No New Replies
Hot topic  Hot Topic (New)
No new  Hot Topic (No New)
Poll  Poll (New)
No new votes  Poll (No New)
Closed  Locked Topic
Moved  Moved Topic
 

RSS Lo-Fi Version Time is now: 22nd July 2014 - 06:36 PM

Armory Tech Airsoft FoxAirsoft.com AirsoftAtlanta.com AirsoftNMore.com Airsplat.com ACMGear.com
AsiaAirsoft.com YZH.hkm TrinityAirsoft.com AirsoftRC.com eHobby Asia Vote for us
to add your 180x30 banner here, pay ad zone 2

If you enjoy using this website, please please support us financially with a small donation or upgrade your account. If you can not help us financially,
then at least help us by telling a friend about us and share us on your favorite social networking website.

content copyright AirsoftForum.com 2003-2013 an Airsoft Forum, Airsoft Chat Room, Airsoft Auctions, Airsoft Reviews, and Airsoft Classified Ads Community
Get your discount from Armory Tech Airsoft
Get airsoft guns and more with award winning customer service at Trinity Airsoft
Airsoft Atlanta is your source for quality airsoft guns and rifle parts
Professional Airsoft Solutions
to add your Text Link here, pay ad zone 3