Jump to content



to add your 300x250 banner, pay ad zone 5
Airsoft Atlanta is your source for quality airsoft guns and rifle parts
to add your Text Link here, pay ad zone 3

AirsoftAtlanta.com AirsoftNMore.com Airsplat.com AirsoftRC.com
Vote for us to add your 180x30 banner here, pay ad zone 2

If you appreciate this website, please ASF Donation or Check Out the ASF Store. If you can not help us financially,
then at least help us by telling a friend: Share us on your favorite social networking website Bookmark and Share

Important Announcement!

Our Pinzgauer Project is in "Pre Launch" - Click Here to let us know what you think before the project goes live.

Photo
* * * * * 1 votes

Tokyo Marui Ak-47 Dissassembly Guide


  • Please log in to reply
26 replies to this topic

#1 CyanidePill

CyanidePill
  • Gender:Male
  • Location:Cali

Posted 09 July 2006 - 05:33 PM

I made this tutorial for my site, but thought it would help on this forum. This tutorial instructs how to take out the gearbox out of the Tokyo Marui Ak-47, for upgrading. It does not include instructions for how to open the gearbox of upgrade it.

You donít need many tools for this:
Philips Screwdriver
Flathead Screwdriver
Working Tweezers
Fine-point Philips Screwdriver

1. Lets begin; personally I like to take off the stock and pistol grip of the gun. I think they get in the way when Iím working with the gun. To take off the pistol grip just unscrew the screw under in pistol grip and slide it off. For the stock, there are 2 screws in the underside, and 1 screw on top. When taking off the stock make sure you unplug the mini plug when you pull it off (youíll know what I mean when you start pulling the two parts apart.) when you are done with that it should look like this;




2. The next step is to take off the top cover of the gun. First take off the dust cover, and where you push the button to pop it open, we want to take out the metal rod connected to the button. Use the Flat head screwdriver. Just stick it in there and then pry out the rod


3. Next we want to detach the hop-up lever from the top cover. We want to use our fine point Philips screwdriver to remove it. Keep the tweezers handy to pull out the level so it doesn't get lost.


4. And the last step in removing the top cover is to unscrew the tiny screw on the left side of the top cover. Use the small fine point Philips screw driver.


5. Now we slide off the cover, and it should look like this.


6. At this point we want to take off the firing selector switch. First use the fine point flat head screwdriver to pry of the little screw cover (picture one). Now take the large Philips screwdriver and use it to unscrew the large screw holding the cover on (picture 2). Then you should you be able to take of the selector switch (picture 3)
1. 2. 3.

7. Now we want to turn the gun over and unscrew the 4 screws. Two of then are where the clip goes and two a little above that. Use the large Philips screwdriver to take them apart. When doing this makes sure you are supporting both parts of the gun, because you donít want it to fall apart on you





8. Here's the tricky part. Now we want to pull apart the two sides of the gun. Do this very carefully; you donít want to ruin the hop-up. Donít put to much pressure, and if something feels stuck donít put force into it.




9. Remember when we removed the stock, now we want to take out the screws on that part. There are two on each side. When you take out the screws, that metal part slides out the top. Slide it out. If the mini plug gets stuck just loosen it up.



10. Finally we are ready to take out the meck box, slowly we want to work it out of there, making sure that the wires arenít getting caught on anything.



©2005 Aleksey Pavlov

Hope this helped, I can tidy it up a bit if needed.

Sticky?

#2 Electric_Sheep

Electric_Sheep
  • Gender:Male
  • Location:Huntsville, Alabama
  • Interests:Airsoft, Computers, Gaming, Cars

Posted 09 July 2006 - 05:59 PM

its about the same for ics to, so not just for tm aks
:::I understand the difference between a sniper and a sniper rifle, do you?:::
::: Have a gearbox question? PM me :::
IPB Image

#3 CyanidePill

CyanidePill
  • Gender:Male
  • Location:Cali

Posted 09 July 2006 - 06:16 PM

Thank you, I was sure how exact the TM is with other companies so I didnt state anything.
Maybe if this is good enough it could get pinned?

#4 KrYpTiK

KrYpTiK
  • Location:Los Angeles, CA
  • Interests:Cars, Girls, Grass, Music, Hangin, Guitar, Airsoft, Home Theater

Posted 09 July 2006 - 06:40 PM

Well done, very well done.

(I see my format for guides is starting to catch on a-grin.gif )

#5 CyanidePill

CyanidePill
  • Gender:Male
  • Location:Cali

Posted 09 July 2006 - 06:41 PM

HAHA psh, I made that before I was even a member of ASF in that EXACT Format, Except I called the gearbox a mechbox... a-grin.gif

#6 CyanidePill

CyanidePill
  • Gender:Male
  • Location:Cali

Posted 10 August 2006 - 12:43 PM

What the heck, im trying to find the edit button to fix all the broken links....and I cant find it.

#7 general pain

general pain

    I am Hungrier then cookiemonster

  • user_has_broken_email
  • 2,457 posts
  • Location:Ringoes NJ
  • Interests:I like airsoft, guitar, snowboarding, cars, video games, and football

Posted 14 August 2006 - 10:16 AM

PM me the URL for the pictures and tell me wich go where and I will put them in for you.

#8 vietec

vietec
  • Gender:Male
  • Location:Dayton, Ohio
  • Interests:I am very interested in airsoft, origami, and I used to be a magician. That was how I found airsoft, I happen to go to a web site that sold magic tricks and airsoft guns. I thought that the airsoft gun was cool so I bought one and here I am. Airsoft is now my only hobby besides origami.

Posted 04 September 2006 - 12:20 AM

Hey are the pictures working for you? I can only get a couple of pictures.

QUOTE (vietec @ Sep 4 2006, 01:17 AM) <{POST_SNAPBACK}>
Hey are the pictures working for you? I can only get a couple of pictures.

Sorry, nevermind, it's just my crappy internet. The pictures are slowly starting to come up one at a time. a-embarassed.gif

#9 Hunter13

Hunter13
  • Gender:Male

Posted 05 October 2006 - 06:48 AM

Whats up with the pics?

Edited by Hunter13, 05 October 2006 - 06:48 AM.


#10 KrYpTiK

KrYpTiK
  • Location:Los Angeles, CA
  • Interests:Cars, Girls, Grass, Music, Hangin, Guitar, Airsoft, Home Theater

Posted 05 October 2006 - 09:21 AM

QUOTE (Hunter13 @ Oct 5 2006, 04:48 AM) <{POST_SNAPBACK}>
Whats up with the pics?


I can see them...

#11 ThePwninator

ThePwninator
  • Location:Raleigh, N.C. Occupation: Breathing Income: Over $100,000 Education: Third world
  • Interests:God, Jesus, Airsoft, music, HTML, JavaScript, Japanese, bass, guitar, sleep, eating, petting the dog, shooting stuff, walking, breathing, sitting, listening, watching, laughing, talking, chilling, and theres probobly some other stuff

Posted 17 October 2006 - 11:00 AM

It's basicly the same for the JG Dragunov.

#12 jmw703

jmw703
  • Gender:Male
  • Location:Louisville,Kentucky

Posted 05 November 2006 - 09:43 AM

Same for utg ak except the selector switch.



PS. the hop-up lever is the hardest part getting back on,its a pain.



#13 ziggo99

ziggo99
  • Gender:Male
  • Location:Murphysboro ,Illinois
  • Interests:Airsoft; cars; guns; PS2; CoD2; BF:2(dont like I like stuff with the number 2?); being single; ticking people off; wishing I had a girlfriend; wanting a job at Best Buy; breathing, living; computers; debating with my teachers, friends, and strangers; Vietnam books; Naruto and other Anime, like .Dot Hack, Initial D, Outlaw Star, FFX, FFX2, Pilot Candidate

Posted 28 December 2006 - 03:04 PM

I'm hopeing for a yes, but will this work for my CYMA CM028?

AIM Screen Name Is: medart468 I'm open to questions and chat
You cant spell manslaughter without laughter
Newbies looking for help and answers?

#14 Mixed Breed Terror

Mixed Breed Terror

Posted 30 December 2006 - 10:39 PM

Wow, great guide! I'm probably going to use then when I get my TM Ak!

#15 Bullfrog

Bullfrog

    LTC Amphibious B. Croak, USMCJROTC(ret)

  • user_has_broken_email
  • 1,205 posts
  • Gender:Male
  • Location:Huntsville, Alabama
  • Interests:1. My relationship with Christ<br />2. My beautiful wife for 29 years<br />3. My strong willed 18-year old son<br />4. Gardening<br />5. Reading<br />5. Art<br />6. Hiking &amp; camping<br />7. Puzzles

Posted 04 January 2007 - 11:50 AM

QUOTE (ziggo99 @ Dec 28 2006, 04:04 PM) <{POST_SNAPBACK}>
I'm hopeing for a yes, but will this work for my CYMA CM028?

This breakdown guide is good for the CSI AK Assailant (rebranded JG SVD AK) also, which happens to be manufactured by CYMA. If I were a betting man I would guess there will be a lot of similiarity between the TM AK47 and the CYMA 028.

http://www.airsoftsp...I_assailant.htm

You can compare the CSI breakdown here with the TM
"but I do not love the bright sword for its sharpness, nor the arrow for its swiftness, nor the warrior for his glory. I love only that which they defend..." Faramir
Battery Encyclopedia!!!

Even after 29 years, I'm still her handsome prince...I am one happy frog.

#16 slydark

slydark
  • Location:Forest Grove Oregon
  • Interests:Airsoft, guitar, tae kwon do, drawing, painting

Posted 10 January 2007 - 08:25 PM

hi, Ive been looking around for a good disassembly guide for my AK and the one thing I havent been able to find is how to take off the forgrips.
could anyone tell me how or point me in the direction of a guide that could do so?

#17 vietec

vietec
  • Gender:Male
  • Location:Dayton, Ohio
  • Interests:I am very interested in airsoft, origami, and I used to be a magician. That was how I found airsoft, I happen to go to a web site that sold magic tricks and airsoft guns. I thought that the airsoft gun was cool so I bought one and here I am. Airsoft is now my only hobby besides origami.

Posted 28 January 2007 - 01:05 PM

QUOTE (Bullfrog @ Jan 4 2007, 11:50 AM) <{POST_SNAPBACK}>
This breakdown guide is good for the CSI AK Assailant (rebranded JG SVD AK) also, which happens to be manufactured by CYMA. If I were a betting man I would guess there will be a lot of similiarity between the TM AK47 and the CYMA 028.

http://www.airsoftsp...I_assailant.htm

You can compare the CSI breakdown here with the TM

Yes it works perfectly for the CM.028, you would've won that bet. Too Late now. I used this guide to take apart my CM.028 and do the TM parts swap out.

QUOTE (slydark @ Jan 10 2007, 08:25 PM) <{POST_SNAPBACK}>
hi, Ive been looking around for a good disassembly guide for my AK and the one thing I havent been able to find is how to take off the forgrips.
could anyone tell me how or point me in the direction of a guide that could do so?

If you want to remove the forgrips, then you will have to take them one at a time. For the top foregrip, you have to remover the screw at the top on the top left side of the reciever right next to whre the grip is. You'll see the grip. For the lower one, you must remove the screw that is under the barrel and comes from the gas reciever. Once you remove this screw, you slide the gas reciever thingy forward and take the lower forgrip off. Sorry if it's unclear, I wish I could get pics, I'll try to get some up.

#18 Silence

Silence
  • Gender:Male
  • Location:KA / Germany

Posted 25 February 2007 - 04:09 PM

QUOTE (Electric_Sheep @ Jul 9 2006, 11:59 PM) <{POST_SNAPBACK}>
its about the same for ics to, so not just for tm aks


No, definitly not ! The ICS Gearbox is accessable by only removing 6 Screws !

2 at the Stock
2 at the Body
1 at the Pistol Grip
1 at the Selector Switch

Thats all, you don't have to remove the HU Selector and the Upper Receiver is completely different.

#19 Ines(udna

Ines(udna

Posted 14 June 2007 - 10:08 PM

so where do I go from there? I couldnt find a mechbox walkthru... durp
-for sure then

#20 Guest_JBauer2492_*

Guest_JBauer2492_*

Posted 14 June 2007 - 10:20 PM

try www.mechbox.com or go to www.airsoftcore.com and find the written guide of a v3 mechbox with hundreds of pictures.

#21 Ines(udna

Ines(udna

Posted 15 June 2007 - 02:48 AM

sweet thanks a lot!

#22 xda2jojo(aka:scorpion)

xda2jojo(aka:scorpion)
  • Location:Davao City, philippines

Posted 09 August 2007 - 11:06 AM

images speaks louder than word...










Edited by xda2jojo(aka:scorpion), 09 August 2007 - 11:51 AM.

IPB Image




#23 xda2jojo(aka:scorpion)

xda2jojo(aka:scorpion)
  • Location:Davao City, philippines

Posted 09 August 2007 - 11:17 AM














Big Thanks: Airguns.co.kr
IPB Image




#24 Grippster

Grippster
  • Gender:Male
  • Location:Santa Rosa, CA
  • Interests:Airsofting - MMA - Music - Surfing - Free Diving - Cliff Diving - Sailing Diablo 2 - Drums - Politics - Traveling - Family - Friends

Posted 10 September 2007 - 08:57 PM

wrong thread woops

Edited by Grippster, 10 September 2007 - 08:58 PM.

Sig out of regs. ~Xhado

#25 TheChinaManWithOpium

TheChinaManWithOpium
  • Gender:Male
  • Location:China
  • Interests:Mountain climbing, back-packing, hunting, camping, and most of all boating.

Posted 03 January 2008 - 04:22 AM

how do you disassemble the complete front?
all trades for this member currently closed.

#26 xda2jojo(aka:scorpion)

xda2jojo(aka:scorpion)
  • Location:Davao City, philippines

Posted 01 February 2008 - 05:04 PM

Take out the dummy cleaning rod,
Take out two screw: bottom side of front sight and gas port(under outer barrel)
Take out 1st the front sight part and next the gas tube...
Take out the handguard...
Now you can see some screw at the trunnion part...
Just take note the orientation...
IPB Image




#27 Nikolai47

Nikolai47

Posted 08 March 2011 - 09:53 PM

Hey, I was disassembling my CM040D and I got to the last step where you are pulling the mech box out. Underneath the selector switch there is a plate that will not allow my to simply pull the GB out of the gun. I can't get pics, but it is getting stuck on the lip of the upper right of the upper receiver. Thanks guys.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users