Jump to content

cloud9racer

Member
  • Content Count

    9
  • Joined

  • Last visited

  • Feedback

    %

Community Reputation

0 Neutral

About cloud9racer

  • Rank
    ASF Immigrant
  1. Dropping the price of the tanaka to $375+shipping. Ghillie suit - $60+shipping. Both - $420+shipping
  2. The price is actually not including the bipod and scope. I haven't had time to post up the mk23, so I will determine the price for that later.
  3. Tanaka M700 A.I.C.S. w/ PCS bolt After taking on the sniper role, my first sniper rifle was the Tokyo Marui G-Spec, which I sold in order to get this. The G-spec was fully upgraded at 500 fps, tightbore barrel, amongst other things. I must say after receiving the Tanaka, I was surprised with how real and heavy it felt. While it doesn't shoot as perfectly straight as my G-spec did, its adjustable fps and far range definitely make up for it. However, my friends and I are once again taking a break from airsoft, (This sadly might be the end of airsoft for us) and I would like to sell my Tanaka which has been sitting in my room for many months now. This is a slightly used Tanaka M700 A.I.C.S. w/ PCS bolt (Pre-ban). This differs from the newer ones without the power control system as you are able to adjust the fps on the fly from about 300-600 FPS. It has been skirmished so there are slight signs of wear, but be assured I clean the entire rifle after every game the best I can. I'd estimate about 1,000 rounds have been through this. It has the "Best Gun hop-up kit" which is basically an AEG hop-up kit designed specifically for the M700 A.I.C.S. It may not be as good as the newer King Arms VSR hop-up chamber conversion, but it is still better than the stock hop-up. It also has the Dees Custom 6.01mm tightbore barrel (588mm) which makes the shots that much more precise. I have used electrical tape to act as a barrel spacer for even more stability. The 30rd magazine has been kept in great condition and therefore the seal is great and there is no leak at all. The outer barrel tip has been colored black. It comes with all the stock parts and tools necessary to get to the internals. I do not have the manual however. Here is a video of the Tanaka in action, as well as me in the ghillie suit. You'll notice there is string on the barrel, scope, and bipod. It was my temporary form of camouflage: jute twine with camo paint. It actually works very well in certain terrain such as in the video, so I will leave it on or take it off depending on what you want. I have ordered extreme digital stencils from bulldogarms ( http://catalog.bulldogarms.com/index.php?m...p;products_id=6 ), but I never got around to painting it, so I will include the stencils with the Tanaka. Video: http://www.youtube.com/watch?v=bu661K2WASQ Pictures: http://s672.photobucket.com/albums/vv82/cl...%20m700%20aics/ Upgraded internal parts: -Best gun hop-up chamber ( http://www.airsoftpost.com/tanaka-m700m24-...th-p-25721.html ) -Dees Custom 6.01mm tightbore barrel (588mm) Accessories (not included): -King Arms Spring Eject Bipod ($40) -Tasco 3-9X40E illuminated scope w/ high rise mount rings ($45) I am asking $400 + shipping. This is very reasonable as these are getting harder to obtain, especially in such good condition. Notes: There are two flaws to the sniper rifle however. First, the harris bipod stud under the frame has broke by me trying too aggressively to take off the bipod. ( http://i672.photobucket.com/albums/vv82/cl...cs/IMG_0220.jpg ) If you wish to attach a bipod, you must purchase a ball joint bipod to use closer to the barrel of the gun ( http://i672.photobucket.com/albums/vv82/cl...ljointbipod.jpg ). Secondly, the stock hop-up adjuster was lost so a custom screw has been made to do the job. ( http://i672.photobucket.com/albums/vv82/cl...s/IMG_0823r.jpg ) These have been taken in consideration for the price. Woodland Ghillie Suit Also up for sale my woodland full ghillie suit originally bought from here: http://www.theghilliesuits.com/SYN-NMS.html. If you watch the video above, you will notice me in the ghillie suit. Click on the link for more information. I have sewn the head piece onto a boonie hat which will come with the ghillie suit. It definitely worked much better than I thought it would. I didn't even use it in a perfect environment as shown in the video, yet everyone always had trouble spotting me. This is a size large. I am only 5' 8" and 150lbs and it fits me fine, with plenty of room available. Looking for $75 + shipping. Buy both the Tanaka and the ghillie suit and I'll do $450 + shipping. I prefer Paypal but accept money orders as well. Please feel free to ask any questions. I am looking to get out of airsoft so I am not looking for any trades. I also have a Tokyo Marui Mk23 nbb that I will post up soon.
  4. Well I doubt it's the same as the one on airsoftoutletnw because of the different count of BBs (500 vs 2,000) and different weight. I might just buy these instead of the TSD .28s I was gonna get...
  5. Well I got careless when taking off the bipod. Is there a replacement for this part or will I have to use the other kind of bipod now (the one that locks into the chassis)? I don't really want to have to buy another bipod... but if that's my only option, which is a good one to get? This is the bipod I already have: http://img.photobucket.com/albums/v298/clo...cs/IMG_0219.jpg
  6. I bought this about a year ago because I wanted to try the sniper role. I definitely got into it... but I got tired of my G-spec, so I recently bought a tanaka. While my tanaka isn't as good as my G-spec performance wise, it is more realistic, so I decided to keep that. Anyways onto the G-spec. It's only been through about 1,000 shots (About half was after upgrades) It shoots flawlessly and in a perfect straight line just like VSRs are supposed to. Very accurate up to about 150 feet away with .30 bbs. (able to hit an 8x11 sheet of paper) I've gotten easy "kills" in games from 200+ feet away. You will not be disappointed with the performance. As you can see in the pictures, the gun is in perfect condition with no scratches or scuff marks, because the field I used to play on was mostly grass. I was planning on giving it a paintjob but never got around to it. There is an orange tip at the end of the outer barrel but is easily removed with sandpaper if you wish to do so. (Or you can just paint over it) Moving along to the internal, this gun was upgraded by Airsoft Extreme in San Jose, CA. It was upgraded using all Laylax PSS10 parts. (I've since learned how to take apart the gun and it is very easy to clean/maintain) The outer barrel was drilled just enough to let the longer tightbore barrel pass through to be concealed by the silencer. Barrel spacers were installed to make sure there is no wobble. 3 springs (Stock, 150sp, & 170sp) are included in case you want to change the fps. Also included are all the other stock parts and manuals that came with the gun. While the bolt pull is more difficult than one with a stock spring, it is very easy to get used to (I'm just an average 140 lb 5'8 guy and I can pull it easily.. even while prone!) I've taken very good care with this gun and properly clean and lube/grease each part after every few games to make sure it is always in perfect condition. The following is a complete list of upgraded internal parts: -PSS10 150sp spring (500fps) -PSS10 170sp spring (550 fps): Currently the g-spec has the 170sp spring installed -PSS10 High pressure piston -PSS10 Metal spring guide w/ ball bearings -PSS10 Trigger and Piston sears -PSS10 Spring guide stopper -PSS10 Barrel spacers -Firefly Hop-up bucking for VSR-10 (hard type) -Prometheus/Laylax 6.03mm tightbore barrel (430mm) External parts: (Not included) -King Arms Spring Eject Bipod -Tasco 3-9X40E illuminated scope w/ King Arms mount rings Pictures: http://img.photobucket.com/albums/v298/clo...ec/DSC02081.jpg http://img.photobucket.com/albums/v298/clo...ec/DSC02074.jpg http://img.photobucket.com/albums/v298/clo...ec/DSC02078.jpg http://img.photobucket.com/albums/v298/clo...ec/DSC02076.jpg http://img.photobucket.com/albums/v298/clo...ec/DSC02079.jpg http://img.photobucket.com/albums/v298/clo...ec/DSC02086.jpg http://img.photobucket.com/albums/v298/clo...ec/DSC02087.jpg http://img.photobucket.com/albums/v298/clo...ec/DSC02088.jpg Payment: Looking for $400 shipped for everything except the bipod and scope. I spent about $600 for the gun and parts, so you are paying only 2/3rds of what I payed. I accept money orders and PayPal. I'm not really interested in trades but I'll consider them ONLY if your offer is irresistible. GBBs, mp5ks, shotguns, AEGs (No run-of-the-mill armalites, mp5s, etc.) Parting Out: I am willing to part out as soon as a buyer takes the G-Spec either with stock parts or upgraded parts. Then, I will price each part accordingly. Feel free to PM me if you have any questions or if you need more pictures.
  7. Well there isn't really much extra care with the 6.01 barrel. You just need to make sure you use high-quality BBs with it which you should with any tightbore barrel. The main thing is you want to upgrade the tolerance (diameter) and the length, since the stock one is pretty short. I personally have the laylax 430mm, and while it does get much better groupings and range than the stock barrel, I wish the edgi barrel was out when I fully upgraded my g-spec. Also, I think dees customs will cut inner barrels to a specified length, so you can get the inner barrel to end right before the end of the silencer as opposed to the middle of the silencer. I'm guessing it will be somewhere around 460-480mm) I'm not sure whether it comes with a 6.05 or 6.08 but regardless, you definitely want to upgrade the inner barrel if possible to a 430mm or longer inner barrel. (You'll have to file down/drill the cap of the outer barrel)
  8. Okay well an airsoft store next to me has the .29g Maruzen SGMs in stock at about the same price it would cost for me to ship the .43g orange BBs. I'm just scared that the SGMs will be too light for my sniper rifle (shooting at 550+ fps) What do you guys suggest I get? (I need to make up my mind soon because I have a skirmish coming up) And I do have a 6.03mm tightbore, so will I benefit more from the SGMs? Here are my list of parts: -PSS10 170sp spring (550 fps): -PSS10 High pressure piston -PSS10 Metal spring guide w/ ball bearings -PSS10 Trigger and Piston sears -PSS10 Barrel spacers -Firefly Hop-up bucking for VSR-10 (hard type) -Prometheus/Laylax 6.03mm tightbore barrel (430mm)
  9. I have a TM G-spec with a Laylax PS170 spring shooting at about 550 fps+ with .2g BBs (I have the laylax 430mm tightbore, and firefly hard bucking too, everything tefloned) Will these BBs be too heavy for what I'm shooting at? I think I saw a small review of these bb's before, but I was wondering how it stacks up to other brands/weights. If you don't like these, can you guys recommend me some other BBs and places that have it in stock in the U.S.? .43g, 5.95 +/- 0.01 Highly polished, slick competition grade BB's These heavy airsoft pellets are perfect for use in airsoft sniper rifles and bolt platform guns. The .43g pellet maintains its energy and trajectory better than lighter pellets, especially at higher velocities. These pellets are very similar to the more rare Digicon or Straight .43g bbs, and have very good accuracy results. Even in guns firing between 400 and 550 fps, the accuracy increase is noticeable. Because the number one force acting on a pellet is wind resistance, a heavier pellet travelling slower maintains it's energy longer. This allows you to get increased accuracy, while maintaining and in some cases increasing your range. http://airsoftoutletnw.com/index.php/Airso...500-rounds.html
  10. It's still up for sale, but the price is still firm. PM me if you are interested.
  11. Still for sale. I'll throw in a free case for the sniper rifle.
  12. Up for sale is a Western Arms Wilson Combat FBI Trial 1911 (S.C.W. Ver. 2) in pristine condition. It comes with a silver outer barrel. It also comes with a 15 Rds single stack Wilson Combat magazine which does not leak at all. My friend gave me this as a birthday present a few months ago, and I believe he bought it about a year ago. It hasn't seen much use as it was only used for shooting targets (I'd estimate less than 500 shots). It shoots flawlessly and has a nice kick to it. The silver outer barrel has a few scratches if you touch carefully, but the gun itself has no scratches or marks that are apparent. Don't take my word for it, just look at the pictures and judge for yourself. I do not have the original box or manual, so it will be shipped in another Western Arms box. I am looking for $175 shipped. I accept PayPal and money orders. Not looking for any trades at the moment. Pictures: http://img.photobucket.com/albums/v298/clo...al/DSC02252.jpg http://img.photobucket.com/albums/v298/clo...al/DSC02255.jpg http://img.photobucket.com/albums/v298/clo...al/DSC02246.jpg http://img.photobucket.com/albums/v298/clo...al/DSC02245.jpg http://img.photobucket.com/albums/v298/clo...al/DSC02248.jpg http://img.photobucket.com/albums/v298/clo...al/DSC02250.jpg http://img.photobucket.com/albums/v298/clo...al/DSC02257.jpg http://img.photobucket.com/albums/v298/clo...al/DSC02258.jpg If you have any questions or need more pictures, please feel free to PM me.
  13. I bought this about a year ago thinking I would take the sniper position on my team. However, we all stopped playing early spring in 2007 so it only got a few uses. I only shot about 300 bbs through it while skirmishing, and 500 on targets. It shoots flawlessly with .30g and higher bbs and when you are properly concealed, skirmishing with this gun will make your opposition tremble. Accurate up to about 150 feet away with .30 bbs. It's been sitting in my room as a display gun and I think it's about time for me to let it go to someone else. As you can see in the pics, the gun is in perfect condition with no scratches or scuff marks, because the field we used to play on was mostly grass. I was planning on giving it a paintjob but never got around to it. There is an orange tip at the end of the outer barrel but is easily removed with sandpaper if you wish to do so. (Or you can just paint over it) Moving along to the internal, this gun was upgraded by Airsoft Extreme in San Jose, CA. It was upgraded using all Laylax PSS10 parts. The outer barrel was drilled just enough to let the longer tightbore barrel pass through to be concealed by the silencer. Barrel spacers were installed to make sure there is no wobble. 3 springs (Stock, 150sp, & 170sp) are included in case you want to change the fps. Also included is all the other stock parts and manuals that came with the gun. The following is a complete list of upgraded internal parts: -PSS10 150sp spring (500fps) -PSS10 170sp spring (550 fps): Currently the g-spec has the 170sp spring installed -PSS10 High pressure piston -PSS10 Metal spring guide w/ ball bearings -PSS10 Trigger and Piston sears -PSS10 Barrel spacers -Firefly Hop-up bucking for VSR-10 (hard type) -Prometheus/Laylax 6.03mm tightbore barrel (403mm) External parts: -King Arms Spring Eject Bipod -Tasco 3-9X40E illuminated scope w/ King Arms mount rings Pictures: http://img.photobucket.com/albums/v298/clo...ec/DSC02081.jpg http://img.photobucket.com/albums/v298/clo...ec/DSC02074.jpg http://img.photobucket.com/albums/v298/clo...ec/DSC02078.jpg http://img.photobucket.com/albums/v298/clo...ec/DSC02076.jpg http://img.photobucket.com/albums/v298/clo...ec/DSC02079.jpg http://img.photobucket.com/albums/v298/clo...ec/DSC02086.jpg http://img.photobucket.com/albums/v298/clo...ec/DSC02087.jpg http://img.photobucket.com/albums/v298/clo...ec/DSC02088.jpg Payment: Looking for $475 shipped for everything you see. I spent about $700 for everything including upgrades and assembly, so you are paying only 2/3rds of what I payed. I accept money orders and PayPal. I'm not looking for any trades at this time. Feel free to PM me if you have any questions or if you need more pictures.
×
×
  • Create New...