Jump to content

Hari

Elite
  • Content Count

    623
  • Joined

  • Last visited

  • Feedback

    %

Everything posted by Hari

  1. Laylax Zero + SS5000 spring of PDI, ....break of the set pin. They could break, but not like it was on regular conditions.
  2. That's what you think =) I'm sorry cant support your opinion, from personal experience with 3 tanaka guns with Palmer rig installed =)
  3. KJ or Tanaka upgraded, or a Star/Ares one,.....and a external iar regulator. Those make you stay on the 400cap or whatever you want below or above with a simple allen key tool.
  4. No G&G, but the Best gun is still in some retailers, I have it from a Taiwan shop, I cant remember the name. PS: I know, necro post, but maybe someone is looking for one =)
  5. About the Spartan VSR kit. 2Roy was the real producer of the kit, no King Arms, and 2Roy are the same guys than Pax Armamentia (Korean based). Spartan is the new Pax Armamentia guys brand. Ergo....2Roy and Spartan are the same kit. My 2 cents.
  6. Long story short, you need to fill the volume of air of the barrel with the volume of air from the cylinder. If you have less volumen in the cyl than the barrel, then, you will have problems. And not all the air from the cyl go to the barrel, so keep in mind that have the Cyl. Volume close to that of the barrel is a risky bet.
  7. I find the PDI Bore up VC Cyl set, plus Outer barrel PDI Long (554mm inner barrel) plus EdGI 6,00, the greatest build in spring rifles. And I have a Maruzen Type 96....and envy that kind of VSR every day, they shoot the same but are easier to adjust.
  8. Looks like a cheaper option to the Firefly one, and close to the inner KM55º and KM45º VSR buckings desing. The aditional O-rings integrated could provide better seal and increase shot to shot performance, but I personally see more interesting the two contact point with the bb's instead the classic one or the SCS plus regular bucking. IDK if the SCS will work fine with a dual contact inner desing bucking, but even with the standar nub we will have a 2 point contact hop up (best centered bb, with shot to shot equal spin performance). My 2 cents.
  9. Did you try with other mags? It sound like impact plates worn out.
  10. Laylax one is totally overpriced, the handdle boss seems to be worse than the PDI. The VC works for 550fps/0,2 or less, more than that you risk to break the piston. The VC system helps to avoid the negative preassure in the beguining of the shooting phase. Th HD is a regular piston. The palsonite cyl is IMO better than the Laylax one. If I were you I will buy the palsonite VC set, and get the gun below 540-530 fps. More than enough to have a good range with good accuracy (look for a good barrel and a PDI Hop and madbull rubber, for example). Hope it helps.
  11. Yes, the internals like piston or guide or spring, are te same. Buy Trigger, spacers, hop up, muzzle caps or barrels are different. Keep in mind that in Xfire shop (PDI shop) there are some common parts, but there are 2 different categories with indicidual not compatible upgrades (like the ones I wrote before).
  12. ¿¿¿Since when does PDI make Tanaka parts??? Tanaka K98 use a Tanaka Hop up with a Tanaka cut, same cut as M700 series. Probably you could adapt a M700 regular Hop up to the K98 (they are diferent), or also try the KJ M700 Hop up chamber there. I have 2 M700 series and one K98, and belive me, you can't put a PDI Hop up chamber there. BTW there are Tanaka Hops still for sale, they are difficult, but try taiwan shops, I bought one Best Gun Mount for Kar 98 this summer, when they have 3 years at least out of stock everywhere.
  13. Why the M24 not? just curious. There are 2 versions of the M24, one without iron sights and with a fluted barrel =P Rex, there are a M700 AICS and a L96 of tanaka, both have an AICS "stock", buy one is a M700 and the other in an AI. Both exist. But I'm going to say what you want, not trying to convince anyone to go into another brand, Ares have a good potencial and is a good gun, no matter what people said. You just have to search a bit about it. Is a pity you can't enter in arnies =P Get an EdGI 6.00 bullbarrel (this means 10mm OD and 6.00 ID), AEG cut (not PSG cut). And get also a SCS nub. And don't forget to buy a good hop up bucking. Just like I told you in another post. =) If you don't want to mod with DIY mods, then also get as many Hi Flow Valves for the .338 as Mags you will buy. 1 High flow for each mag. With that you will be in the 500-550fps range (or you should) with Green Gas (propane) and around 15-25Cº (you know how it works, the hotter weather you have, the more fps you will see in the gun). If not (whatever the reason is, and after looking for a posible problem like air leak or something), just ask, there is an easy mod, all you need is a different screw or something to cut a bit of the old one =) I'm more into the DSR1 mods (these are the ones I have to upgrade for friends), and with a 590mm 6.00 barrel, SCS and bucking along with the DIY mod, the shoot 520 fps in a 15Cº day and can call hits as fas as 78m in a human torso with Madbull 0.36 (whatever the people said, I'm happy with that bb, bioval 0.27 are not heavier enough if you have something called wind, and 0.29 SGM are so so, and they are expensive.). Not bad at all If you like the Ares one, go for it, is a solid and valid gun.
  14. Why you have 2 pistons and why Ben is not trying to do a 90º config in the VSR base? In upgraded platform I see more convenient to run on a 90º base than a 45º, this is one of the things I hate about VSR/BAR. I know that reinforced sears and piston will last you a long time (or it may) but there's not the only reason to run on 90º
  15. A chrono is an useful tool, and more useful for a sniper =P there are no way to know the power with a position in the pcs. As I told you before, not all the guns have the same output, and not all the guns have the same config. What is good for me, doesn't have to be good for you.
  16. Don't take me wrong, but he said that where he is there are hot weather all the year, and also said that he cares about a 100 dollar difference (Ares vs Tanaka), so, what's the point of talking about RHF ALL the time. Ok, they are great, they have an awesome power, but,.....they are out of range for most of the players!!!!! It's like lot of you are in the RHF "team", think about it a little, most players can't afford that guns, or can but don't want to spend too much in the hobby. If he is talking about Ares 338, stay on topic please. Or at least read the post above, someone mention RHF, and you just repeat the same. He said the thing about hot weather, and you talk about springs.....read first!!!!
  17. Not really, there are a solution for the low FPS in all the ARES guns. 4 points: -Get an EdGI 00 Barrel, more accuracy and FPS. -Get a good bucking, I bet on Madbull Shark red (60º), but, please,don't install the fishbone nub, is soft and makes the bb go random. Accuracy and little fps -Get an SCS nub (if you buy an Ed Barrel, you could buy also this unexpensive part, it makes the BB go straigh and far). Accuracy, and less FPS (nor a lot, but it press the bb more than a nub, so, less fps, nothing you have to worry about). -Mod the Mag, this is the more difficult thing to do. you have to cut or replace with a shorter one, one of the screws in the mag. 1 mm is enough with the rest of the point. Also, with the High flow valve you do the same than the number 4 point, ....or you could do both =P Barrel and bucking in the Ares guns are AEG cut. Is a nice gun once you mod a llitle, and RHF are too expensive for lot of people, no doubt they are among the bests rifles in airsoft, but they are not for everyone. Tanaka Pre Ban are, in my opinion, better than the Ares guns, but, in my opinion too, Tanaka Preban are the best gas rifle in airsoft is you know how to mod it.
  18. You remember right .05 ID 10 OD (my apologies to everyone non spanish user =P, but is pretty easier in our mother language) Feo, ponle: -Camara de Hop si le pones un nuevo cañon. -Set de cilindro y un SPR 300% -Goma nueva si cambias el Hop. Es como todos los de muelle, la unica diferencia es que las partes son mas dificiles de encontrar. Ahh! y ponle una base para la mira tambien, y de paso si me dices todo lo que quieres de X fire, seguro que te sale mas barato que pidiendoles a ellos jijiji PD: Te odio, no me puedo comprar TANTOS rifles ¬¬'
  19. 450fps with 0.2g or with 0.3g? Is just....geta chrono and test, there is no rule for this, each rifle is different. I'm firing at 670 fps 0.2 with the PCS at 80%, and 550 at 50% more or less.....yes, I have 2 fully upgraded tanakas with PCS and still without the G&G Striker spring (I don't need more power =P) installed.
  20. You really know how a PSG gearbox works? or a L85, with the pre compressed spring.....really? I don't know why you try to correct somebody if you don't read carefully (or know what I'm talking about even before I write PSG 1 the first of all) =) PSG1 gearbox is not a regular gear....but they are AEG aren't they? Please read how a PSG1 gearbox works (the bb left the barrel first and then it does the regular job of compression.....is like a bolt action semiautomatic), and then back again here and read what I said. DMR and Sniper Rifle are both vague terms when we talk about airsoft. Even when you talk about AEG there isn't always a clear winner (PSG example, or any aeg with a Pre-compressed spring config).
  21. PSG1, L85, and modified AEG do it the same, without further vibration in the shoot. Sniper and DM is not about range or accuracy, coz both could be the same, is about a playing ROLE, sniper don't go with the squad and pick up the longer shots.... Is not related to range, you could be a sniper with a stock 300 fps VSR 10 or you could be a DM with a 600FPS M14 People don't usually understand this, so you can see in the fields people with a Well L96 going with the pack and shooting to whatever they see. In terms of performance, DMR and Sniper rifle could be the same or close as range is proportional to (in a upgraded gun with precision inner barrel, hop up, bucking, ....) power. The only thing that makes a sniper rifle shoot further is the field rules (here in Spain the most common is 550 for bolt action and 450 for DMR with auto not allowed).
  22. I may be wrong, but it seems ironic when he said "cornelius".... Anyway, the range depends on the power, If I can have a fully upgraded 550 fps DMR and a fully upgraded 550 "sniper rifle", then...I will have the same performance or nearly the same. If you don't have any power difference between the to categories, then you don't have difference between DMR and Sniper Rifle.
  23. You can, PDI have one Hop up chamber for the SR2 but it's not the same as the Type 96. I mean to say that the SR2 Hop and the Type96 one are not the same unit. But you are right =)
  24. The VC system broke, the compartment where the little ball were "explode" and when I try to fire again it damage the Cyl, the Head and many other things, is my fault, and the repairs were expensive enough to not do it again =P -=TiGGeR=- The weakest part of your config is the stock cylinder, the handdle boss (the part between the rest of the cyl and the bolt) could break if you put too much stress on it, when that happends ....change it for a PDI one or an EdGI or JP or OK, Laylax Teflon cyl have the worst handdle boss I ever seen in my life (and cost a lot!!! I can't explain why they do the Handdle boss with that thin pins it have, instead the PDI cyl that comes with 3 hard points). I think you might run with the 250% and seal all the parts as perfect as you can to aim to 520fps more or less, more than enough to have long and stable shots.
×
×
  • Create New...