Jump to content

babacanoosh

Member
  • Content Count

    119
  • Joined

  • Last visited

  • Feedback

    %

Community Reputation

0 Neutral

About babacanoosh

  • Rank
    ASF Citizen
  1. Hello all, Well I went away to college for 2 years, and finally came back for a little while and decided to pick up airsofting again. After picking up my gun and trying to shoot it...nothing. Thought "well okay, battery is dead obviously." charged it, and tried shooting it, a few whiny shots later no more shooting. I have a firefox 2300MAH 11.1 Battery...and I must have left it fully charged for 2 years and not touched it. Would this have destroyed my battery? I know it is the battery because I tried out a different battery (just a regular 9.6V) and it shot like a damn champ. So what I am asking is do you guys have any tips on how I can avoid this when I purchase a new lipo? I know that I should discharge it, but no lower than 70% otherwise the **** blows up in ur face, stops working, all that great stuff. Also where would you guys pick up a discharger, or something to monitor levels? Thanks guys!!!!
  2. anyone? Please I need to get this thing up and running.
  3. would I get the guarder air nozzle for AK or mp5? My gun is an mp5...but I have an ak length inner barrel/cylinder assembly.
  4. Hello, I have the following parts being used: PDI 210% spring Element 300% torque gears element helical metal tooth piston systema magnum motor guarder anti reversal latch king arms 8mm gear box JG wiring w/mosfet Systema cylinder Guarder cylinder head Systema duracon piston head prom. ak length inner barrel 11.1 2100MAH lipo Big out H nub Firefly bucking I need a new nozzle and as well new bucking. I am planning on installing a 260% spring....so obviously im going to need hard. Any suggestions?
  5. Hello, I have the following parts being used: PDI 210% spring Element 300% torque gears element helical metal tooth piston systema magnum motor guarder anti reversal latch king arms 8mm gear box JG wiring w/mosfet Systema cylinder Guarder cylinder head Systema duracon piston head prom. ak length inner barrel 11.1 2100MAH lipo Big out H nub Firefly bucking for some reason on semi auto my gun fires in like a 2 round burst...any ideas? This is VERY weird. Thanks guys!
  6. Hello all, I'm having an issue...when I pull the trigger, which moves one of the contact plates to slide inside the other, it takes way too long of a trigger pull. Is there anyway to adjust this? thanks! THIS IS A TM MP5.
  7. Thanks for the feedback. I am on a tight budget, so I understand that there are better parts on the market. I just need to save money. And good point. I forgot about that. a stock TM cylinder head. any suggestions? I was thinking a guarder. ALSO I MAY HAVE FORGOTTEN TO MENTION I HAVE A SYSTEMA CYLINDER
  8. Because prom. high speed gears with a 210% spring is a joke. and m120 is pushing it already as it is.
  9. Hello all, I have an mp5 with currently the following parts installed: Systema polycarb piston (1st and 2nd tooth shaved) Prom. High speed gears Systema duracon piston head Systema m120 King Arms 8mm gearbox Madbull AK length 6.03 barrel Systema Magnum Motor Big out h nub Firefly soft bucking Guarder Anti-reversal latch Systema metal spring guide I plan on Changing the following things out: the madbull inner barrel, m120, the prom. high speed gears, and systema piston. I will be installing the following parts: Element 300% Max torque gears with Piston (metal teeth), JG Mosfet, Prom. AK length 6.03 inner barrel, PDI 210%, and using a Firefox 11.1V 2300MAH Lipo. How do you expect this setup to perform and hold up? Thanks!
  10. Hello all, I was wondering how you guys would recommend removal. What size hex is the hole? I cant seem to find the right size. Any other suggestions? I have a replacement, but just cant seem to get that pinion gear off. Thanks, Baba
  11. I am interested in the drop leg holster for the mk23. will keep u updated....
  12. lol thanks man, well, to tell you the truth, it got somewhat old. Every game was the same, where I would shoot tons of people, but they would basically cheat, and I would have to yell at them to call their hits. Because they didn't see me, they assumed nobody saw them get hit. That's the problem with "big operation" games with a lot of people. But yes, I also need the money very badly. Thanks for the free bump
  13. ey guys, After much though, I have come to the conclusion that I am done with the art of sniping. For sale I have my fully upgraded vsr-10 gspec. Here are the upgrades: Babacanoosh's VSR Gspec - Gun: $200 Internals: Laylax Spring Guide - $25 Laylax 550 fps spring - $20 Extra Laylax 500 fps spring - $20 Laylax Zero Trigger w/high pressure piston - $170 Laylax Teflon Cylinder - $90 Laylax Cylinder Head - $18 PDI 6.01 430mm Tightbore - $150 Brand new hard firefly bucking - $20 Custom Barrel Spacer Externals: King Arms Harris Bipod - $40 M3 Replica Scope - $70 2 Sunshades - $20 Custom Paint job Total: $843 I would like to sell this gun for $475 This gun is extremely accurate, and can hit targets consistently at 75-80 yards. Let me know if you are interested. NEXT: Babacanoosh's custom woodland ghillie - $50 this thing has seen some heavy use, but is very well broken in. It has everything you need in order to blend in perfectly with your surroundings. This is the same ghillie used for the majority of my airsoft sniper videos: http://www.youtube.com/user/babacanoooosh It consists of woodland bdu's, both size M (large) and a woodland boonie. On the jacket, many elastic loops have been hot glued/sewn on, as well as on the boonie hat. here are some pics of it in action:
×
×
  • Create New...