Jump to content


  • Content Count

  • Joined

  • Last visited

  • Feedback


Community Reputation

0 Neutral

About TylerHemingway

  • Rank
    ASF Immigrant

Profile Information

  • Gender
  1. Thanks for the help. I will look into the G&P. What is the highest fps that won't break the internals? And what parts would I need to reach that safely?
  2. I am looking at an M4 style gun. So far my top choices are G&P M4, KWA M4, and G&G GR16. All of them are full metal which is what I want. I am looking at upgrading the internals and adding a RIS to them. If you could tell me what is the best quality and best for upgrading that would be appreciated. Thanks.
  3. I am going to be purchasing an M4. I would like some recommendations for purchase. I would like it to be full metal AEG. My budget is going to be around $1000 for the gun and all the parts. I am willing to replace everything internally to get the best performance possible. I would like the most power that won't completely destroy everything inside. My main priority is accuracy at a decent distance so I will be purchasing a 6.01mm inner barrel. Any help is appreciated.
  4. In your opinion, what do you think would be the best investment for upgrading? I was looking at an M4 style gun. I would upgrade the internals as needed. I just would like to know what the forum thinks is a good starting point.
  5. I was looking at a systema gun and wanted to add a 20" outer and 509mm inner and I didn't know if Systemas could take regular aftermarket barrels or do they have to have systema brand barrels?
  6. I would like to know how the blow back system will affect me upgrading the internals if I decide to get this gun: http://www.airsoftgi.com/product_info.php?products_id=6217 Thanks
  7. How hard is it to rewire? COuld I just buy wire extensions and just move the wires to the back?
  8. I need this battery for the motor I will be getting http://www.airsoftgi.com/product_info.php?products_id=3373 And by the sound of it only the CA crane will be able to have the battery fit.
  9. I was wondering if a crane stock will fit on a gun. Is there anyway to tell or do you just know from experience with the parts? The gun and stock in question are http://www.airsoftgi.com/product_info.php?...roducts_id=2651 http://www.airsoftgi.com/product_info.php?products_id=923
  10. Thank you. I had those parts picked already. I didn't know that they were for that though.
  11. Thank you for clarifying. I am on a "budget" but not to the point where $20 makes a difference. EDIT: What parts should I buy for the replacement of the valve and gas route?
  12. I have conflicting info from two people. I was told in an earlier post to get the plate and now I am told to not get it.
  13. Thank you for your help. My main concern was that the inner barrel would end before the rail system and it would look weird.
  14. Thank you for your help. This model is looking better for what it includes http://www.airsoftgi.com/product_info.php?products_id=5328 If I am looking at adding a 10 inch rail system to it. What length inner and outer barrel would I need for it after adding the 10 inch rail system? EDIT: I need to know the length of the barrels because I am not familiar with how far in the gun the barrels go before actually coming out. I hope that makes sense.
  15. Thanks to everyone for the help. What parts would "blow up" if the psi was to high? What is the highest psi you should have to be on the limit of breaking but not to the point where it is unsafe to you and the gun? EDIT: How does this look for a final build? http://www.airsoftatlanta.com/PDI_VSR_10_6...4mm_p/65267.htm http://www.airsoftpost.com/product_info.ph...oducts_id=25742 http://www.airsoftpost.com/product_info.ph...oducts_id=28726 http://www.airsoftgi.com/product_info.php?products_id=5612 http://www.airsoftgi.com/product_info.php?products_id=6429 http://www.airsoftgi.com/product_info.php?products_id=6428 http://www.airsoftgi.com/product_info.php?products_id=6431 http://www.airsoftgi.com/product_info.php?products_id=6430 http://www.airsoftgi.com/product_info.php?products_id=6433 http://www.airsoftgi.com/product_info.php?products_id=6432 http://www.tokyo-model.com.hk/ecshop/goods.php?id=944
  • Create New...