Jump to content

to add your 300x250 banner, pay ad zone 5
Airsoft Atlanta is your source for quality airsoft guns and rifle parts
to add your Text Link here, pay ad zone 3

AirsoftAtlanta.com AirsoftNMore.com Airsplat.com AirsoftRC.com
Vote for us to add your 180x30 banner here, pay ad zone 2

If you appreciate this website, please ASF Donation or Check Out the ASF Store. If you can not help us financially,
then at least help us by telling a friend: Share us on your favorite social networking website Bookmark and Share

tyqre

Member
  • Content Count

    117
  • Joined

  • Last visited

  • Feedback

    0%

Community Reputation

0 Neutral

About tyqre

  • Rank
    ASF Citizen
  1. I did clean the track although I left the spring in. I don't have any silicon oil on me right now but I will try it soon, my friend has some.
  2. It's not the hop up.....the problem is in the mag, the issue is what I explained above..
  3. So It looks like its either the mag or the bbs. What I have observed happening is that the bottom bb of the sock wedges up next to the next bb in line and jams its self in there stopping the flow of bbs. Can the sides of the mags wear down or something? or do I have crappy bbs or something? They are TSD .25's. I've used them for ever with no issues but maybe they are good enough or something. Thoughts?
  4. Yea I'm not too worried about the fps. I had an aeg that shot ~300 fps with .25 but the damn thing was a sniper. So yea, that's weird with the range issue, well it's not really and issue. I am planning in using .25s cuz that's what I buy usually.
  5. Yes, of course. I was just thinking about putting something like the r-hop is this gun. Does the hopup mechanism function similarly to that of an aeg. Could I put an rhop in it?
  6. Yea I always use .25's anyway. But could using different gasses give me better results? Like higher fps so I could use a heavier bb.
  7. Interesting. So I could just switch out gasses is I wanted more power, legally of course. Should I use lighter bbs with propane? I was going to use .25's I it but I have hunch that I should be ok.
  8. In the description is this gun it says something about how using Propane will void the warranty and it is bad for the gun. What are your thoughts on this? I thought green gas was just propane with silicon oil added. I was thinking about getting the kmp9 so I just wanna get this straight. Also, what are your thoughts on the gun itself?
  9. No..I have checked each thing and everything seems to be in line except the nozzle is too far forward. I am sanding it down. But my mosfet short circuted and died so I have to get another one before I do any more testing....
  10. I have the non raider version. What I did to mine was I added a mosfet, and 11.1v lipo, shimmed, corrected AOE, and added the flat-hop mod. Best gun I ever owned. 5 inch groupings at 200feet. And, I was only shooting about 300 fps because I downgraded the spring to get a faster RPM and reduce wear on gears and the gun came with a 6.01 tightbore, I just left it but I would stay away from anything tighter than a 6.03. I've only had a spur gear strip(stock) and the stock piston stripped. But that was when I first made the upgrades and It was all running fine until I recently had a feeding issue which has yet to be resolved. :/ but all in all great gun, lasted about a year and a half with the upgrades mentioned.
  11. Well I took out the spring trying to figure out what was wrong with it. So, it didn't work with the spring in-front of the hop-up either. And about adding a sector clip, I had one in there before, took the sector clip off before I posted here to see if that would fix it, but to no avail. With the spring in place, the lower reciever usually pushed the hopuop into place but without the spring its just in the right spot all the time.
  12. Well, it doesn't secure to the gearbox, the hopup unit slides forwards and locks into place in the upper receiver like all other m4's and the nozzle goes into the hopup. I think I figured it out though, I think I can see the nozzle sticking into the ho-pup even when the tension is out of the gearbox, so I'm going to try and sand it down.
  13. I tried taking the arm from the system hop up and putting it in the g&g stock one but the same thing happened. Again, this is the same one that has always worked in the gun until recently. I'm thinking that the bucking is worn out and pressing too far into the chamber. I'll try madbull red ones that I ordered. and by same thing I mean that the bbs get stuck right at the end of the feeding neck where the bb would then sit infront of the bucking, again, leading me to believe that the bucking is pertruding..or the tappet plate nozzle is sticking out, I havent been able to look at the gun since yesterday so I will do some more looking around when I can. All looks straight to me
×
×
  • Create New...