Jump to content

to add your 300x250 banner, pay ad zone 5
Airsoft Atlanta is your source for quality airsoft guns and rifle parts
to add your Text Link here, pay ad zone 3

AirsoftAtlanta.com AirsoftNMore.com Airsplat.com AirsoftRC.com
Vote for us to add your 180x30 banner here, pay ad zone 2

If you appreciate this website, please ASF Donation or Check Out the ASF Store. If you can not help us financially,
then at least help us by telling a friend: Share us on your favorite social networking website Bookmark and Share

jwberry

Member
  • Content Count

    125
  • Joined

  • Last visited

  • Feedback

    N/A

Community Reputation

0 Neutral

About jwberry

  • Rank
    ASF Citizen
  • Birthday 07/01/1978

Contact Methods

  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Gender
    Male
  • Location
    Boston

Previous Fields

  • Airsoft Replicas Owned
    Classic Army SA58 Carbine Classic Army LWRC M6 Shorty ICS Full Metal M4A1 w/M203 ICS MP5A4 Umarex G36C KWA M9 Tactical PTP KWA 1911DS PTP Socom Gear Oasis KSC 1911 HFC Mac 11
  1. Sometimes mixing different manufacture bevel and pinion gears will cause a pitch angle that will always be noisy.
  2. Trinity was my favorite before they vanished from the internet.
  3. Elite Force has a 1 year warranty on their high end guns.
  4. Its a JM SR16, a china clone of the VFC SR15E3. http://www.airsplat.com/Items/ERM-JM-M4-SR16.htm
  5. I've worked on a few. The Pistons tend to strip, the metal plates on the stock hinge corrode causing power issues, the gears are 16:1 and break if upgraded springs are used, the hop up doesn't seal well, and its a pain in the to disassemble. I don't remember the barrel being 2 piece.
  6. Out of the 3 we received at my store 1 was DOA out of the box. So I'll tear that apart soon to fix it, probably put a video on youtube about the internals. I'm not keen on APS, they have a poor track record. It has a problem fitting midcaps not high caps. Of the mags we tested only Pmags and Emags fit without modifications.
  7. As stated it breaks in the bushes quicker than normal, but if you want to clean it use something like CRC QD Electronic cleaner or Emerald Performance Plus 3.
  8. Are you using a 9.6 battery? That ROF seems low for a ICS proline. I get 16 rps on a 9.6 with a m120, everything else is stock. If you change the nozzle be aware it doesn't use a standard M4 nozzle.
  9. Classic Army's is called "SAR Offizier M41" Airsplat has them
  10. I'm like 90% certain the last Umarex UMP I worked on already had a full cylinder from the factory. You'll want to double check before you buy one.
  11. Unscrew the front of the cocking tube, remove the front sling bolt, unscrew the barrel. That pin is for the trunnion the barrel screws onto. Once you remove the barrel you can push the pin in and slide the trunnion out the out the back of the reciever.
  12. The Dboys is a copy of the VFC so this should work. VFC selector gears
  13. Its clockwise thread. As you said its pinned instead of set screwed so you aren't going to want to unscrew it and destroy your threads. Take a dremel and cut the plastic parallel to the barrel a few times, hit it with a heatgun and grab it with piliers than peel it of like a banana. Any glue residue can be removed with acetone and a wire brush.
  14. I have an aftermarket tappet plate in my ICS M4. The ICS plate is .25mm wider than the Element on my workbench.
×
×
  • Create New...