Jump to content

to add your 300x250 banner, pay ad zone 5
Airsoft Atlanta is your source for quality airsoft guns and rifle parts
to add your Text Link here, pay ad zone 3

AirsoftAtlanta.com AirsoftNMore.com Airsplat.com AirsoftRC.com
Vote for us to add your 180x30 banner here, pay ad zone 2

If you appreciate this website, please ASF Donation or Check Out the ASF Store. If you can not help us financially,
then at least help us by telling a friend: Share us on your favorite social networking website Bookmark and Share

Ghillieinthemist

Member
  • Content Count

    17
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by Ghillieinthemist

  1. Just incase you do not know what it is, Bullpup is a firearm configuration in which the action (or mechanism) and magazine are located behind the trigger. This increases the barrel length relative to the overall weapon length, permitting shorter weapons for the same barrel length, saving weight and increasing maneuverability. It alternatively allows for longer barrels on weapons of the same length, improving trajectory and effective range. Personally I do not like this design even though it is proven helpful So yay or nay?
  2. I actually owned a tsd sd702 and it was a great rifle, it felt amazing and looked great, very powerful also, right out of the box I believe it was 530 fps with .20, but the l96's I'm not to fond of like other people have said with the thumb hole it sems like it will just get in the way
  3. I've searched through the forum and didn't find the exact answer I wonted so I just have a few questions. So I know that this conversion kit will up the fps and make the bolt easy enough to pull that a baby could do it But since this is gas will the shots be not as Consistent? How many shots could I get before putting in new c02 if I don't have a regulator? Please include any other info that you know about this it will help out a lot http://shop.ehobbyasia.com/pas-co2-convers...iper-rifle.html
  4. Just mine, it's a very reliable rifle from my experience and I would highly recommend it as a beginning rifle.But if you are willing to spend the money EDI is right
  5. Boonie hats are great for a headpiece on a ghillie, the round brim helps the material from getting and your face and it stays secure. There is a thread at the top of this page that could provide all the information that you require
  6. Is it the TSD SD702 that shoots 530fps with .20's?.If it is then yes that is a very good rifle I owned it for a little bit before I realized the bolt was defected but thats a different story
  7. There are screws on the rail right?, Measure the rail and find a rail with the same length.If I'm not mistaken M4,M16, and M14 rails are similar and just take the old rail off and put the new one on It's not that cost worthy either
  8. Awesome paint job and I feel stupid asking but what's that gun on the right?
  9. For instance SVD's have around 600mm barrels but if you had a good hop-up system it really wouldn't matter the length and have better accuracy than SVD's so I would have to agree with the other guys
  10. http://www.combatsportsupply.com/realsword...ealwoodaeg.aspx So that would overall be a better choice?, and for what reasons?
  11. http://www.airsoftgi.com/mobile/product_in...roducts_id=5800 With an FPS of 370 this gun has an effective range of about 120 feet I'm guessing so my question to you would be that knowing that this is a SVD could this be upgradable to have a increase in FPS, I know it seems crazy but even to sniper rifle range, I don't have a budget so anything would be fine
  12. Only a few days TSD SD702 and it already comes pre upgraded
  13. The gun has been shooting fine until now for some reason, I was taking shots and when I cocked the gun back it immediately went back in, you hear it lock but if you let go of the pressure it slams back in, does anybody know what the problem could be?
  14. no when I press the trigger nothing but if I press it and point the barrel down it rolls out, the bolt doesn't stay back either
  15. I just received a TSD SD702 and it simply wont shoot. Every time I :censored2: the gun and go to shoot it does nothing but roll out of the barrel when I tip it over, I noticed a spring in the box that is similar in size to the magazine spring, does this spring affect my shooting, should it be somewhere in the gun,and the bolt wont stay back when I :censored2: it it goes right back, I wasnt sure if it was normal the bolt would stay back anybody that knows what the problem is thanks
  16. I am new to this brand but if they are both tsd would a m700 adapter fit as a substitute here is a picture http://www.airsoftpost.com/product_info.ph...oducts_id=28302
  17. Hello, I own a TSD SD702 http://www.airsoftstation.com/tsd-tactical...od---black.html I was wondering if this suppressor http://www.airsoftpost.com/product_info.ph...oducts_id=33783 would fit on that barrel if you could tell from the images provided thanks alot
  18. Air-force because I have family serving in it
  19. First off I would just like to say hello to everyone on the forum and hopefully get to know a lot of you throughout the time on the forum, OK so,the SD702 has a fps of 530 with .20's and I was wondering if it would be possible to upgrade the spring in any way, it already comes with a pre upgraded spring that's why I was wondering if this is a stupid question, second is there a silencer that would be adaptable to this barrel, I will post a link at the bottom to show what I mean, thanks a ton http://www.airsoftstation.com/tsd-tactical...od---black.html
×
×
  • Create New...