Jump to content

to add your 300x250 banner, pay ad zone 5
Airsoft Atlanta is your source for quality airsoft guns and rifle parts
to add your Text Link here, pay ad zone 3

AirsoftAtlanta.com AirsoftNMore.com Airsplat.com AirsoftRC.com
Vote for us to add your 180x30 banner here, pay ad zone 2

If you appreciate this website, please ASF Donation or Check Out the ASF Store. If you can not help us financially,
then at least help us by telling a friend: Share us on your favorite social networking website Bookmark and Share

Airsoftkid295

Member
  • Content Count

    281
  • Joined

  • Last visited

  • Feedback

    100%

Posts posted by Airsoftkid295


  1. ok, so I can get a matrix 590mm 6.01 barrel for $25, I have the length, but Im using a normal V2 gb with a normal length type 0 cylinder.

    so my question is, is my normal length type 0 enough to get all the air I will need, and I've heard that 6.03 is better than 6.01. is it worth it?


  2. ok, so to make a long story short, I have a long m16 with a 10"metal silencer, 12" metal rails, of course metal gb, and a CA metal body, needless to say, it weighs ALOT, so I want to trade my metal body for your g&g polymer body. my body has few scratches, and few flaws, its black with no trades and is missing the selectr switch but you can keep the one off of the g&g body and put it on the metal body. other than that one switch (which I said you can just keep yours) all the parts are there. thanks and have a great day!


  3. Dear Fellow Airsofters-Just ran 22 mags through this pistol using 2 12 gram CO2 cartridges with .20 bb's and am very impressed! Paid around $40.00 for it at the local Walmart. However these sell online with free shipping for around $32.00!:) Here's the link:

     

    http://www.walmart.com/ip/HK-USP-CO2-Airso...-Black/17133156

     

    FWIW, the sights are dead on and the gun as a whole feels very solid. Comes with the standard 90 day Umarex warranty also:) My dollars worth:)-Gearhead

     

    I agree, I have the same pistol, lots of fun!


  4. well for starters I am having trouble with my CM m4, it worked fine UNTIL I switched the bodies out for a G&P metal body, and it's gone down hill from there. Every 20-30 shots(considering these damn MAG midcaps decide to feed properly which they never do) the gearbox will sort of half turn and then freeze up and wont fire, and the motor and battery will get really hot if you keep pulling the trigger. So how can I solve this problem? I will mostly likley switch out the gearbox for a G&P gearbox, or a systema gearbox depending on what I can find. If you can help me out with this issue I would forever be in your debt. Also, and suggestions on what to do with the MAG mid caps? other than run them over with a truck.

     

    try adjusting your motor height and charging your battery


  5. hello quite like the title says when I placed my polar star fusion engine in my G&P magpul lower it fit quite nicely except for the fact that I cant get the rear receiver pin all the way through. it makes it through the gearbox but hits the lip of the inside of the receiver body and cant come out, its about .5-1mm too low. Now I could just dremel the pin which ill probably do but now im wondering if this will hinder weapon accuracy because if it means that the gearbox is not aligned properly then the air nozzle will also not be properly aligned in hop up. any thoughts?

     

    try moving the GB side to side and pushing the pin at the same time, thats what I have to do


  6. ok, first off, your gun, you build it like you want.

    second, I would put a Vltor carbine mod stock on instead of the shorty full, a magpul MIAD pistol grip instead of the SPR grip you have now, Magpul AFG for the fore grip, and a noveske RIS at the correct length would look AWESOME. But it would cost about $120-150. But again if you like what you have, keep it, don't let someone tell you what you like.

×
×
  • Create New...