Hello everyone. Due to a series of unfortunate events, my savings for OP:LS have dried up. I need to replace it fast, so a sale is in order. Before we get into the products, I would like to lay down a few ground rules.
1-Please make sure to read thoroughly before you ask me a question.
2-I ship from Knoxville TN either UPS Ground or USPS Parcel. Buyer's preference.
3-Please do not threadcrap
4-Free bumps are awesome.
5-If you have a question, please send me a pm and I will answer to the best of my ability.
6-After an item leaves my posession, it is no longer my responsibility. I will give you all necessary information, but it is up to you to do the rest.
7-I will only hold items for a 25% non-refundable down payment. I will ship upon completion of the payment.
8-I am going to be honest and straightforeward with you, and I ask that you do the same.
9-By purchasing anything from me, you agree to all of these rules.
Now, let's get to the good stuff.
First up is a KWA M16! It is a rock-solid performer. Internal upgrades include a 407mm 6.02 deepfire barrel, Wiring to deans, Teflon taping the cylinder head, O-ring expansion, an M110 spring, radiused corners, and a regrease job. The compression is perfect; the gun chrono's 373 with a .25, 24 bps with a 11.1 lipo, and has no problem reaching out past 200 feet. Externally, it has a 12" Daniel Defense Omega FSP rail, Magpul RVG, Moe Grip, MOE Stock, MOE Trigger guard, and ASAP sling plate. The gun is rock solid and looks very nice. It is near brand new, seeing next to no use from me. It has just been sitting in a gun case waiting for someone to use it. I am asking $370 shipped for this rifle.
Next up, a Custom King Arms TRX. This has been a long running project of mine, but I don't use it enough anymore. Base gun is a King Arms Colt M4A1, but it has evolved over time. Externally, I have added a 13" Troy TRX RIS, an ACE Skeletal Stock, and a gas block. It is a great looking rifle overall, and is surprisingly lightweight. Internally, it has been modified with SHS 18:1 gears, a killer shim job, SHS tappet plate, Teflon taped cylinder head, Unknown brand non-ported cylinder, SHS 15 tooth piston, O ring expansion, M100 spring, Radiused corners, Wired to silver 16 AWG wire with deans, and shimming of the trigger trolley. This makes the distance for the trigger trolley to hit the contacts much less, making trigger response seem that much better. Also includes a Madbull 363mm 6.03 barrel and a flat hop mod with an SCS nub. This rifle shoots around 340 with a .25, 20 rps and will surprise you with its range. For all this, I am asking $310 shipped.
Next, a DBoys PDW. This is a great little gun, and I am pleased with it. I have had it for a little while, and it has served me well. Body has some wear, but it is by no means excessive. Ambi selector is very tight, Stock button works fine, and stock secures tightly when folded. It is upgraded with Teflon taped Cylinder head, Guarder m120, O ring expansion, SHS 7 tooth piston, Shimming job, wired to deans, and radiused corners. I have also installed a Madbull 6.03 363mm barrel, along with the REAPS ME1 bucking. This PDW is the first generation, meaning it has no trades. I will include the madbull gemtech silencer I have used to cover the barrel, along with the original PEQ2 that the gun came with, but beaware the back of the PEQ is long gone. FPS is 370 with a .25, Around 20 RPS, and great range for a short gun. Asking $220.
Next up, we have another pretty rare pistol-A KWA Glock 26c! These are also getting tough to buy, as many overseas retailers are out of stock. This has been my workhorse, and the only problem with it is some wear on the slide, nothing another layer of paint can't take care of. It is also fully functioning, and will include 3 mags, original speedloader adapter, barrel swab, hop-up tool and the original box.
Now, I have an ASCU V2 Electronic trigger control for sale. I purchased this and a BTC chimera recently off the forums. I installed the Chimera, and I don't have a use for the ASCU now. It is missing a negative wire motor lead, but that is an easy easy fix. I am asking 50 for the mosfet and trigger unit.
Uploaded with ImageShack.us
Next up is my Go Pro HD Hero 1. Not sure if I want to get rid of this yet. It has everything you will need to get started recording your games. Includes charger, battery, housing, 5 adhesive mounts, floating back, 16gig memory card, and the original box. I am asking 150 shipped for everything.
More in the posts below!!