Jump to content

idohaveweapons

Member
  • Content Count

    7
  • Joined

  • Last visited

  • Feedback

    %

Community Reputation

0 Neutral

About idohaveweapons

  • Rank
    ASF Immigrant
  1. Also, Can someone give me some advice on which I should get? The 590mm or the 650mm? I've been searching google and this board and can never find a definite answer on if the 650 is worth it or if I will need additional upgrades.
  2. I'd like to get the new barrel to increase accuracy but also to fix the problem of the bb hitting the end of the silencer. For some reason with the stock barrel the bb will nick the end of the silencer from the inside and cause damage to the silencer. Really unfortunately. No idea why.
  3. Hi all, noobie here. I'm looking to upgrade my A&K SR-25 with a tight bore barrel. I plan to only use it with the attached silencer. However, what is the maximum length barrel that will fit without it poking out of the silencer? Is a 650mm too long? I'm looking at two different PSG-1 tightbores, one is 590mm and the other is 650mm. Which would you recommend? Any help is appreciated.
  4. Will PSG-1 tight bore's fit this? Like will a 650mm stick out past the silencer? I'm stuck between... http://www.airsplat.com/Items/AC-UPI-DF-CPB10.htm and http://www.airsplat.com/Items/AC-UPI-DF-CPB08.htm Thoughts?
  5. I did a shooting test without the supressor. When shooting with my scope it appeared that the bb's curve slightly to the right. At first it was the hop up but after adjustment it didn't seem to make a difference. It shoots fine, but curves down to the right. This could be the reason why it's hitting the bottom right of the barrel. So this is a barrel problem? What tight bore barrels would you all recommend for the SR-25?
  6. Yes, multiple times. I took the silencer apart and made sure nothing was improperly placed. When I shot it when I first got it, it shot fine. The difference between then and now is I started painting the barrel. Perhaps some paint got into the silencer? Could that cause this?
  7. Hi all, I recently bought an A&K SR-25. After about 30 minutes, the bb's would start breaking inside the suppressor! The appear to nick the bottom right of the silencer, from the gun holders perspective. I have attached a picture to show you what I mean - (don't mind the horrible paint job... it's not finished!) I've only had this gun for a day and haven't shot more than 100 shots. What's going on here? Any help would be appreciated!
×
×
  • Create New...