Jump to content

theBroseph

Authorized Seller Elite
  • Content Count

    81
  • Joined

  • Last visited

  • Feedback

    %

Community Reputation

0 Neutral

About theBroseph

  • Rank
    ASF Citizen
  • Birthday 01/30/1996

Profile Information

  • Gender
    Male
  • Location
    Georgia, USA
  1. NO TRADES NO TRADES NO TRADES Buyer pays for shipping Paypal or cash 1. JG M4A1 w/ crane stock -reshimmed via bevel gear -AoE adjusted -replaced o-rings -PTFE on cylinder head -Madbull bucking (blue) I have also wired a high power 3034 based MOSFET into the buffer tube, and the trigger and main wires have 2mm bullet connectors so you can take the buffer tube off without cutting the wires. Trigger response on a half charged 9.6v battery is similar to a stock gun with a 11.1v. ROF is near ~18 BB/s with the included battery. This gun is ready to go, and is "lipo ready," meaning you can use a 11.1v without the gun exploding. The barrel was polished and with the Madbull blue, I am able to hit a person at 200 feet with the hop up on, using .28 G&G BBs. This gun has been in my possession for about 3 days; it was bought new at Airsoft Atlanta. It has never been fielded. As a result, you are receiving a perfectly tuned rifle, with near perfect externals. I am going to include a 9.6v 1400mah battery (deans), VFC metal carrying handle, two King Arms 100 rd STANAG mags, and two King Arms 90 rd VN mags. Asking price: $90 2. G&P Aimpoint M2 replica SOLD Dead batteries, but in perfect condition. No scratches or wear anywhere. Glass is perfect. Essentially brand new, comes with the original mount. Asking price: $30 3. 8x Metal hi cap mags. SOLD 4 are JG quick wind, 2 are DBoys, 1 is APS, 1 is VFC. They all hold 300, feed perfectly, and shoots 95% of the BB's after a full wind. Externally, some have scratches and very slight dings but no cracks or any pieces missing. Asking price: $35 4. RiotSC dual sector gear SOLD Used, but in good condition. Some scratches here and there and very slight wear on the teeth, but still, indestructible. Asking price: $35 5. G&G .28g BBs 3x bags, one is sealed, two are 85%+ full. Asking price: $15 6. Iron Face mesh mask w/ Revision Exoshield goggles $60 value, both are brand new, never fielded or worn. I bought two of each on accident. My loss is your gain. The goggles are $40 new on ASGI, and the mask is $20 new at Airsoft Atlanta. Asking price: $20 for goggles, $10 for mask, $25 for both. 7. ACM Grip pod and tan KAC vert. fore grip Honestly one of the sturdiest grips I've ever used, the legs are incredibly sturdy, moreso than some other grip pod models I've used. Bought from DX for $15. I found the grip laying around, so I'll throw it in for free. Asking price: $8
  2. Shipping is not included NO TRADES NO TRADES NO TRADES Buyer pays for all shipping fees. I have here a JG M4A1 basic edition ($130 new), except I added my special touch to it. Parts: -SHS o-ring air nozzle $7 -Prometheus "Straight" purple rubber $14 -High power MOSFET unit w/ deans $30 -R-hop w/ flat nub $10 Mods: -AoE adjusted -Cylinder corners rounded -16 AWG PTFE. rewire -Replaced all o-rings -Sealed cylinder to cylinder head w/ PTFE -Cleaned and relubed -Barrel polished With the stock spring it was shooting 380 before mods, now it's hitting 390~395 fps w/ .2g, chrono'd with a Madbull V2. This gun can reach out to 230 feet w/ G&G .28g BBs, measured using Google Earth. This gun outranges my friend's brand new KWA KM16BR. The groupings were inferior, but I prefer it to be broader, since that increases the probability of hitting a target at range. Externally, besides some scratches on the pins from removal, the gun is new. This gun has never gone outside my house, and I've shot maybe ~300 rounds since I added the new parts. NOTE: I was originally going to put a full stock on the gun, but I decided against so the buyer can put what they wanted on it. So the gun will be sold with the wiring as is. You can't put the buffer tube ring all the way on, so you can either take it off or have it like it is in the pic. Getting a battery bag is the simplest solution to hide the wires. Asking price: $130 for the gun. KAC style (KWA made) rear sight INCLUDED! Buy the gun within the next 48 hrs after the time of this posting, and I will include a 9.6v 3300mAh battery...FREE. (The black things on the wiring are zip ties) I have a plethora of mags and accessories here:
  3. I can, but that isn't something worth my time doing. You should try looking up YouTube videos, usually you can fix it by replacing the o-rings and wrapping all seals with PTFE. Currently I have 5 guns in queue, so please hold off any requests for the time being.
  4. I'm looking for a set of neodymium magnets. Accidentally broke one of the magnets because they're just too strong and smack random things. I don't need the can, but I do want a EG700 armature if anyone has one. Other 20~25 TPA motor armatures will be considered.
  5. Another possibility is that the barrel/bucking are not completely secured into the hop up unit.
  6. The barrel is too long and the velocity of the BB is dropping way too fast in the barrel before it even leaves. If you cut down the outer barrel you may have also removed some stabilization for the inner barrel. I think you will be fine just by replacing/cutting the inner barrel and locking it into place with screws or gasket.
  7. Let me start by saying that my tech service is not being offered as a "job." Rather, I do it for the enjoyment of building guns. Because of this philosophy, I work on each gun as if they were my own, and I make a personal guarantee that anything that leaves my hands will be nothing short of perfect. Some other things: I only work on two guns at a time. If you give me control of the parts that are going into the gun, I will offer free repairs for as long as you own the gun. My fortes are in AK, M4, and P90 models. I have experience and am comfortable with Tavors, AUGs, MP5s, M14s, Masadas, and M249s. I have done over twenty DSG builds. At that point, most techs are pretty much comfortable with everything else. Because I am just starting out as a online tech (I generally work local), I will offer very low rates. Pricing is negotiable but to get an idea, it's around $10/hour. A DSG 360/55 build usually takes 3-4 hours for me. Most of the waiting time with techs is on parts and unforeseen delays. I will always do a basic tune up on any gun that comes to me, be it a repair or custom build. The tune up includes: -installation of sorbo/neoprene -14 AWG tfl. rewiring w/ t-connector -sealing all non moving compression components -replacing all o-rings -polishing bushings, cylinder, and the piston and tappet guide rails -relube -bevel to pinion shimming -AoE adjustment -rounding the gearbox shell's cylinder corners That's just the basic stuff. So please contact me if you are interesed. UPDATE (3/1/14): I am now going to offer video logs of the tech work performed on the gun. I am also fine with doing live tech work, so the customer can see what is going on with their gun, and also to ensure every part they purchased for their gun is in fact going into their gun.
  8. I'll consider any chronograph as long as it's a good offer and isn't a Madbull. I will take any ICS PEQ2 box as long as the external condition isn't too bad.
  9. That's a bit out of budget for this project gun, which is eventually going to be sold later anyway. bump. may also be interested in internally broken guns, as long as they are externally sound and the owner hasn't attempted to fix it.
  10. Looking for an AEG to start a build off of. Guns that use STANAG mags are preferred . I don't want any gun that has been tuned or used. I essentially want a brand new AEG but not willing to pay new. Don't send me offers on guns that are new but at prices close to retail, that's not the point here. Following brands will not be considered for purchase: APS, KWA, G&G combat machine, ICS, Ares
×
×
  • Create New...