Jump to content


Authorized Seller Elite
  • Content Count

  • Joined

  • Last visited

  • Feedback


Everything posted by theBroseph

  1. NO TRADES NO TRADES NO TRADES Buyer pays for shipping Paypal or cash 1. JG M4A1 w/ crane stock -reshimmed via bevel gear -AoE adjusted -replaced o-rings -PTFE on cylinder head -Madbull bucking (blue) I have also wired a high power 3034 based MOSFET into the buffer tube, and the trigger and main wires have 2mm bullet connectors so you can take the buffer tube off without cutting the wires. Trigger response on a half charged 9.6v battery is similar to a stock gun with a 11.1v. ROF is near ~18 BB/s with the included battery. This gun is ready to go, and is "lipo ready," meaning you can use a 11.1v without the gun exploding. The barrel was polished and with the Madbull blue, I am able to hit a person at 200 feet with the hop up on, using .28 G&G BBs. This gun has been in my possession for about 3 days; it was bought new at Airsoft Atlanta. It has never been fielded. As a result, you are receiving a perfectly tuned rifle, with near perfect externals. I am going to include a 9.6v 1400mah battery (deans), VFC metal carrying handle, two King Arms 100 rd STANAG mags, and two King Arms 90 rd VN mags. Asking price: $90 2. G&P Aimpoint M2 replica SOLD Dead batteries, but in perfect condition. No scratches or wear anywhere. Glass is perfect. Essentially brand new, comes with the original mount. Asking price: $30 3. 8x Metal hi cap mags. SOLD 4 are JG quick wind, 2 are DBoys, 1 is APS, 1 is VFC. They all hold 300, feed perfectly, and shoots 95% of the BB's after a full wind. Externally, some have scratches and very slight dings but no cracks or any pieces missing. Asking price: $35 4. RiotSC dual sector gear SOLD Used, but in good condition. Some scratches here and there and very slight wear on the teeth, but still, indestructible. Asking price: $35 5. G&G .28g BBs 3x bags, one is sealed, two are 85%+ full. Asking price: $15 6. Iron Face mesh mask w/ Revision Exoshield goggles $60 value, both are brand new, never fielded or worn. I bought two of each on accident. My loss is your gain. The goggles are $40 new on ASGI, and the mask is $20 new at Airsoft Atlanta. Asking price: $20 for goggles, $10 for mask, $25 for both. 7. ACM Grip pod and tan KAC vert. fore grip Honestly one of the sturdiest grips I've ever used, the legs are incredibly sturdy, moreso than some other grip pod models I've used. Bought from DX for $15. I found the grip laying around, so I'll throw it in for free. Asking price: $8
  2. Shipping is not included NO TRADES NO TRADES NO TRADES Buyer pays for all shipping fees. I have here a JG M4A1 basic edition ($130 new), except I added my special touch to it. Parts: -SHS o-ring air nozzle $7 -Prometheus "Straight" purple rubber $14 -High power MOSFET unit w/ deans $30 -R-hop w/ flat nub $10 Mods: -AoE adjusted -Cylinder corners rounded -16 AWG PTFE. rewire -Replaced all o-rings -Sealed cylinder to cylinder head w/ PTFE -Cleaned and relubed -Barrel polished With the stock spring it was shooting 380 before mods, now it's hitting 390~395 fps w/ .2g, chrono'd with a Madbull V2. This gun can reach out to 230 feet w/ G&G .28g BBs, measured using Google Earth. This gun outranges my friend's brand new KWA KM16BR. The groupings were inferior, but I prefer it to be broader, since that increases the probability of hitting a target at range. Externally, besides some scratches on the pins from removal, the gun is new. This gun has never gone outside my house, and I've shot maybe ~300 rounds since I added the new parts. NOTE: I was originally going to put a full stock on the gun, but I decided against so the buyer can put what they wanted on it. So the gun will be sold with the wiring as is. You can't put the buffer tube ring all the way on, so you can either take it off or have it like it is in the pic. Getting a battery bag is the simplest solution to hide the wires. Asking price: $130 for the gun. KAC style (KWA made) rear sight INCLUDED! Buy the gun within the next 48 hrs after the time of this posting, and I will include a 9.6v 3300mAh battery...FREE. (The black things on the wiring are zip ties) I have a plethora of mags and accessories here:
  3. I can, but that isn't something worth my time doing. You should try looking up YouTube videos, usually you can fix it by replacing the o-rings and wrapping all seals with PTFE. Currently I have 5 guns in queue, so please hold off any requests for the time being.
  4. I'm looking for a set of neodymium magnets. Accidentally broke one of the magnets because they're just too strong and smack random things. I don't need the can, but I do want a EG700 armature if anyone has one. Other 20~25 TPA motor armatures will be considered.
  5. Another possibility is that the barrel/bucking are not completely secured into the hop up unit.
  6. The barrel is too long and the velocity of the BB is dropping way too fast in the barrel before it even leaves. If you cut down the outer barrel you may have also removed some stabilization for the inner barrel. I think you will be fine just by replacing/cutting the inner barrel and locking it into place with screws or gasket.
  7. Let me start by saying that my tech service is not being offered as a "job." Rather, I do it for the enjoyment of building guns. Because of this philosophy, I work on each gun as if they were my own, and I make a personal guarantee that anything that leaves my hands will be nothing short of perfect. Some other things: I only work on two guns at a time. If you give me control of the parts that are going into the gun, I will offer free repairs for as long as you own the gun. My fortes are in AK, M4, and P90 models. I have experience and am comfortable with Tavors, AUGs, MP5s, M14s, Masadas, and M249s. I have done over twenty DSG builds. At that point, most techs are pretty much comfortable with everything else. Because I am just starting out as a online tech (I generally work local), I will offer very low rates. Pricing is negotiable but to get an idea, it's around $10/hour. A DSG 360/55 build usually takes 3-4 hours for me. Most of the waiting time with techs is on parts and unforeseen delays. I will always do a basic tune up on any gun that comes to me, be it a repair or custom build. The tune up includes: -installation of sorbo/neoprene -14 AWG tfl. rewiring w/ t-connector -sealing all non moving compression components -replacing all o-rings -polishing bushings, cylinder, and the piston and tappet guide rails -relube -bevel to pinion shimming -AoE adjustment -rounding the gearbox shell's cylinder corners That's just the basic stuff. So please contact me if you are interesed. UPDATE (3/1/14): I am now going to offer video logs of the tech work performed on the gun. I am also fine with doing live tech work, so the customer can see what is going on with their gun, and also to ensure every part they purchased for their gun is in fact going into their gun.
  8. I'll consider any chronograph as long as it's a good offer and isn't a Madbull. I will take any ICS PEQ2 box as long as the external condition isn't too bad.
  9. That's a bit out of budget for this project gun, which is eventually going to be sold later anyway. bump. may also be interested in internally broken guns, as long as they are externally sound and the owner hasn't attempted to fix it.
  10. Looking for an AEG to start a build off of. Guns that use STANAG mags are preferred . I don't want any gun that has been tuned or used. I essentially want a brand new AEG but not willing to pay new. Don't send me offers on guns that are new but at prices close to retail, that's not the point here. Following brands will not be considered for purchase: APS, KWA, G&G combat machine, ICS, Ares
  11. I've recently managed to loosen my schedule to allow plenty of free time to build guns. I've been out of the game for a little while, so I'm not too up to date on what's popular/needed anymore. Do people still require upgrade services or does everyone do it themselves now? By upgrade services I mean everything from custom builds to repairs to performance upgrades.
  12. M4A1 external parts lot -VFC handguards -VFC LE stock with all mounting hardware -VFC carry handle M4 metal hi cap mags All feed flawlessly in my 40 RPS polarstar, some have wear some don't -4x JG quickwind -1x DBoys (has writing on it) -2x APS/Milspec -1x Classic Army ACM speedloader MagPul replica AFG, very nice ICS foam foregrip, extremely comfortable G&P red/green dot M2 aimpoint brand new, no batteries tan foregrip + black foregrip ACM Bipod grip Genuine MagPul FDE handguards I am willing to sell all this stuff as a combined, pseudomysterybox package, without shipping costs, for only $80. The aimpoint alone can be found online for $50, and mine is practically brand new. So...this is a steal. I can't keep up with shipping to so many individuals so I really, really would like this to go in one fell swoop. If you buy it, I'll throw in three bags of G&G .28g bios.
  13. Bump, lots of interest but no commitment. Don't PM me if you aren't 100% sure on purchasing something. You're wasting my, and other people's time because someone else might want the item.
  14. SEE LAST POST FOR A GREAT DEAL!!!! Paypal only Ships from 30022 NO TRADES NO TRADES NO TRADES Prices are firm and they do not include shipping costs. PM me what you want to buy and I will calculate shipping costs. I won't negotiate. M4A1 external parts lot - $10 -VFC handguards -VFC LE stock with all mounting hardware -VFC carry handle M4 metal hi cap mags - $30 for all 8 All feed flawlessly in my 40 RPS polarstar, some have wear some don't -4x JG quickwind -1x DBoys (has writing on it) -2x APS/Milspec -1x Classic Army M4 metal mid cap mags - $8 for both Both feed flawlessly and are in great condition. Very sturdy with a good weight. -1x VFC 120 rd (brand new) -1x CA 130 rd Genuine black/FDE MagPul magazine pullers, $1.50 ea or $8 for all if you buy all the hi caps. KWA speedloader - $5 ACM speedloader - $1 for both 11.1v 3300mah 30C lipo w/ deans 11.1v 2200mah 25C lipo w/ deans 7.4v 4000mah 30C lipo w/ deans All are in good condition, work flawlessly and have plenty of life to them. $20 for all three, $9 ea. MagPul replica flat rail covers, pack of 3 plus extras $5 MagPul replica AFG, very nice $10 ICS foam foregrip, extremely comfortable $10 ACM red laser/LED flashlight fully functional w/ batteries $10 G&P red/green dot M2 aimpoint brand new, no batteries $20 tan foregrip + black foregrip $5 for both ACM Bipod grip $10 Genuine MagPul FDE handguards $15
  15. If I don't reply to your message it means you lowballed me and I'm not interested. Things that are gone have been crossed off. M4 is SPF
  16. 1. I don't want anymore airsoft stuff in my life so anything that isn't gone will be given to local field. 2. No refunds. Items are being sold as-is, hence the low prices 3. Shipping is all on the buyer. 4. Paypal only, will ship within 24 hrs Custom Noveske M4 Internally – $10 Modify 6mm stainless bushings $20 SHS 16:1 gears $45 Lonex A3 motor $11 SHS 15t blue piston $15 Lonex piston head $10 HurricanE M120 spring $30 MOSFET, sorbo, fuse, wire $5 SHS air nozzle w/ o-ring $20 Guarder stainless cylinder head $3 SHS tappet plate $5 SHS spring guide w/ bearings $5 SHS hop up chamber, Madbull blue, stock barrel Externally – $100 Madbull Noveske 7.25 in RAS $20 JG stubby stock w/ extension $5 rail covers $10 KA pistol grip $10 front sight $20 Madbull Shark flash hider Mods: -Teflon taped the cylinder to cylinder head, instead of RTV since I lost the tube when I made this gun lol. -Precisely shimmed the gears relative to the pinion, all motor/gear noise eliminated, full teeth contact throughout. -CA glued sorbo to the cylinder head -Soaked/stretched Danco #14 piston o-ring -Modestly but thoroughly greased the gears with white lithium, and the compression parts with silicone grease/oil. -Polished the cylinder, piston rails, bushings -3034 MOSFET, 14 AWG Teflon wiring, motor connectors, deans -Glued the screws that mount the Noveske rail: absolutely no wobble whatsoever. -Hot glued the rail covers on to remove wobble, if removing the rail covers you can just peel the glue right off; this isn’t really a problem Shoots: ~420 FPS <AT> 26 RPS Problems: -The stock has some sticky residue from a sticker that was on there. Some Goo Gone should get it off. Not really a problem. Yes I just copy/pasted this from my old thread. It's literally the exact same gun, but wasn't sold back then. $120 + shipping $180 + shipping for the gun, aimpoint M2, ACM AFG, VFC rear backup sight, and functional light/laser PEQ-15. JG BAR 10 G-SPEC Internally – $110 Action Army Zero Trigger and piston $15 Laylax M150 spring $30 Laylax bearing spring guide $30 Laylax cylinder head $15 TM hop up chamber $70 Prometheus 6.03x435mm VSR barrel $20 NineBall bucking $20 DangerWerx type b metal hop up arm Externally – $50 Leapers 3-9x50 illuminating scope Mods: -Homemade barrel spacers, completely removes barrel movement -Teflon taped around the bucking -Teflon taped around the cylinder threads -Polished the cylinder to mirror finish Problems: -Hop up lever is not tightly locked onto the pressure adjustment arm, so it moves back and forth freely. I don't have the tools with me to open it up to tighten the screw. -BBs curve left, most likely a dirty barrel or the above arm problem. Shoots: ~520+ FPS $180 for the gun + shipping $210 for the gun and scope + shipping WE 1911 w/ 4 mags (1 not pictured) Slide is partially cracked, entire gun was shoddily paint stripped. 2 mags leak, 2 mags seal fine. The leaking ones do not have followers or springs. The gun functions, shoots 320 fps, but has the gas efficiency of a jeep. 10 rounds is avg. on a standard charge of propane. $40 for all of it + shipping 11.1v 2200 mah 30c (fits M4) $12 11.1v 3300 mah 30c $15 (fits full stock) 7.4v 4000 mah 30c $10 (fits full stock) All have deans and are properly balanced. 8x 300+ rd M4 metal hi caps $30 for all (feeds perfectly, but sometimes picky with BBs) $40 including the magpuls 2x 120 rd M4 metal mid caps (VFC and CA) $12 for both (feeds perfectly in everything) 3x plastic mids, 2 VN style, 1 regular. $5 for all 3 (cannot guarantee feeding) DSG Upgrade kit: SHS blue pistons x3 Lonex PH w/ bearings Polished, rated-for-363mm cylinder RiotSC DSG RiotSC 14.09:1 high speed gearset RiotSC pinion gear Guarder tappet plate Guarder o-ring air nozzle Guarder double o-ring cylinder head w/ 70d sorbo and neoprene AMP M160 spring RiotSC SGS HurricanE bearing spring guide If bought new and separately, you'd have to spend upwards of $220. These parts are all new, except for the piston head which has a bit of chewing but is completely functional. There is grease on the sector gears because I was testing how well they spun. $120 for everything + shipping Box of internals, mostly V2. Springs, shims, gearbox springs, gearsets, pistons, stock airseal stuff, TONS of small parts. $30 for all of it + shipping Xcortech X3200 in excellent condition $60 + shipping Reinforced ACM pinion gear puller, everything included $15 + shipping AI Propane adapter $10 Revision goggles $10 Calipers NOT FOR SALE KWA BB loader $10 ACM BB loader $1 for both ACM Magpul ASAP $5 lipo bag $5 G&G .28 BBs 1 FREE WITH PURCHASE WHILE SUPPLIES LAST. Some are opened but still hold at least 3500 BBs. ASK if you want them included, because they affect shipping.
  • Create New...