Jagger19

Thanks. Do you know if the gun is compatible with any other brands' parts?

I'm looking to buy an HFC M11 off a friend, but it's missing the stock and front sight. They don't affect functionality, but it would be nice to have them. Do you know where I would be able to find replacement parts for these?

Thanks. I wouldn't mind filing down the inside of the magwell; electrical tape can be used to replace whatever I file away.

Thanks. Do you have any suggestions as to receivers that would be compatible?

Before anyone says anything about this gun being a piece of , I'd like you to know I bought it off a friend for $30 as a project gun. I already have a decent enough AEG, but I thought I'd try some tech work on this before doing it on anything expensive. I have a few things I'm looking for, namely; compatible upper and lower recievers; the stock one is too small to fit most mags I've tried compatible rail system; it doesn't have one to begin with. I've heard of rail system that will actually just screw on, any help with that? compatible magazines; if I can get magazines compatible with the gun, it'd be cheaper than buying a new reciever Thanks in advance! If you need me to expand on anything, or if you don't understand something, just post and I'll answer as soon as I can!

Alright, thanks.

I need to get some new bushings for my Cyma AK, I just don't know which size I'll need to get. It's a CM039C, if it helps at all. Thanks in advance!

Thanks a lot. I had planned on getting one of these anyway, as most everybody said to get one, but I wasn't entirely sold on the polymer body. Since you say the body really is that great, I guess I'll be getting a Combat Machine. Now for the internal conflict of whether I'll get a tan or black one. =/

I'm looking into getting an M4 once my AK-47 decides to croak. (Could be a while, yes, but that's beside the point.) I'm primarily looking to get a decent quality gun that's under $200 so that I still have money for any upgrades later. I'm looking at the SRC Dragon, the G&G Combat Machine, and the DBoy Full Metal M4 CASV. SRC Dragon: http://www.airsoftgi.com/product_info.php?products_id=10895 Railed Version: http://www.airsoftgi.com/product_info.php?products_id=10899 G&G Combat Machine: http://www.airsoftgi.com/product_info.php?...roducts_id=6554 Railed Version: http://www.airsoftgi.com/product_info.php?...roducts_id=7285 DBoys Full Metal M4 CASV: http://www.airsoftgi.com/product_info.php?...oducts_id=10663 I will admit I'm fairly new to airsoft. I've only been legitimately airsofting once, so I'm not the greatest at figuring which gun has a better build quality for me. I'm looking at three things: what you get for the price; external quality; and internal build quality. Thanks in advance!

I have a Cyma CM031 AK-74M AEG. I need to get new bushings, but I also don't know which size. Could somebody help me out? Thanks in advance!

Could you link me to that 7-puch rig? Sounds fine to me.

Thanks for your help, guys. I figured out which ones I'm going to get. Again, thanks!

I have the Cyma CM031, and I was planning on buying three mid-caps. I'd like them to have at least a 100-round capacity. What ones should I buy? (I really only plan on spending a maximum of $40 dollars on these, so take that into account.) Thanks in advance!

I have a Cyma CM031 AEG. I plan on buying 3 mid-caps for it. What chest rig would you guys recommend? I don't plan on spending more than $30 on this, so MOLLE is out of the question. What do you think would be good for me (A beginner?) Thanks in advance!

I plan on getting some rails for my Cyma CM031, and I would like to know which ones you would recommend. I'm looking at $40 and below, (I've found some in that price range already,) but I still want to know what you guys would recommend. Thanks in advance!