Kingkat714

I've only ever run GBBRs and I'm looking to get into AEG with a mid/high end AR from a reputable brand. Ideally I'd like a CQB oriented M4/AR15 with rails, but would also consider M16 or Masada. I'm looking to get a battery, charger and magazine at a minimum, but I would really like a grip, sight and flashlight if possible. I'm also on the market for goggles and a mesh face mask if you have any. Price range varies from $150 to $220 for everything

Got the lower yesterday, works like a charm. Thanks <AT>Guges Mk3

I don't know if I'll find anything here, but I would like to buy a high-cap modded WE Scar/ M4 magazine for use with an HPA remote line; doesn't matter if it is the dual mag or single mag system.

No problem, if you can send me a picture and it's fully functional, just PM me and I'll give you my info for an invoice.

Mind sending a picture? That would be a 5.1, right?

I'd like to buy a functional half of a hi capa that I can put a slide on and go with. Brand doesn't matter to me, WE, TM, KJW are all fine. I would prefer a 4.3, but I would consider a 5.1. I'm not interested in anything custom or special, just a basic lower.

I've got the same issue. I've disassembled and reassembled over and over again. Would it be worth buying a new leaf spring? I did notice some strange behavior with the hammer and the striker, but it seems reasonable. Any ideas?

Wow that was a lot faster than I had thought, there is an ASA adapter on the top of the remote coil, so I can simply remove that, then using a 1/8 npt male-male pipe connect the two and connect the output to the rest of the remote line? Simple enough, I have heard of people tapping the Rock's output with a 1/8 npt tap, but I wanted to do some research before I did that, I would think that would ruin the structural integrity of the reg, no? I'll probably just go with a 10-32 to 1/8 npt adapter (http://www.amazon.com/gp/product/B008213Y7U/ref=s9_simh_gw_p328_d2_i1?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=1QVB4S0NXEAWEPFNJXQ8&pf_rd_t=101&pf_rd_p=1389517282&pf_rd_i=507846) Thanks for your help, that was quick and very helpful!

I'm sorry for posting on this ancient thread but I am new here and I need some help. I'm making a remote co2 rig for my WE Scar Open bolt, I already have an empire 20oz tank, a remote line with slide check and quick disconnect, and a palmers Rock regulator. I am wondering what I will have to do to be able to use my Rock, seeing that it has 1/8 npt input and a 10-32 output. What size are standard Co2 tanks' output threads? I need to to go from tank (thread size unknown) to Rock (1/8 npt) to a gauge (which I do not have yet, a link to one would be very helpful) then to the remote line which has the qd and slide check on it (I assume the input threads of this are the same size as the tank's output threads) All help would be nice, links especially, I live in the US so I doubt shipping will be a big issue. Thanks