Jump to content

to add your 300x250 banner, pay ad zone 5
Airsoft Atlanta is your source for quality airsoft guns and rifle parts
to add your Text Link here, pay ad zone 3

AirsoftAtlanta.com AirsoftNMore.com Airsplat.com AirsoftRC.com
Vote for us to add your 180x30 banner here, pay ad zone 2

If you appreciate this website, please ASF Donation or Check Out the ASF Store. If you can not help us financially,
then at least help us by telling a friend: Share us on your favorite social networking website Bookmark and Share

1homer18

Member
  • Content Count

    60
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by 1homer18

  1. Hey guys, quick question to you KWA owners out there. Is it safe to use propane on the M9 PTP? Would you use propane over green gas and why? Is the pistol able to use propane without modification? I'm new to KWA and I'm not too sure if the gun can handle it. Thank you in advance for your help!
  2. How effective would you say it would be?
  3. Hey guys, quick question on R-hops. Instead of using the M nub, can I use a flat hop nub such as the namazu?
  4. Specifically the polymer version. Should I get the large version or short? what're your experience fps or accuracy wise? overall would you recommend and say its worth it? Thanks in advance for your help http://www.evike.com/products/40528/
  5. Thanks for the advice, I'm gonna be getting some .25 soon. I'd just like to know if the type zero can cause low compression in a 363. I see what you mean by joule creep, I honk that's a good idea. Do you think flat hopping could fix my range problem? I had a theory that maybe my lonex soft bucking might be the problem. I checked it for damage and there isn't any noticeable damage, my hopup is stock, I was thinking about getting a prowin, a lonex purple, and a firefly flat nub. What do you think?
  6. Paper in the magwell, and finger on the nozzle during firing. Before the new cylinder I did the piston head into the cylinder covering up the air nozzle in the Mechbox, it had perfect compression. Haven't done the same to the new cylinder.
  7. Thank you for the in depth reply, I appreciate it. Now the spring in the gun is actually an m110 and fires at 360, I had to settle for that because I didn't want to mess with the gun any further. I only took the weapon to the tech because the 140 was too hard to install, the tech instead told me that all he could do was change the cylinder and put a 110. everything in the weapon was installed by me. The mechbox window is radiused, I've got a Sorbo, I have a g&g polycarbonate piston and a lonex POM ball bearing piston head too. And my gun is non-blowback and aoe is corrected. Sorry I should've mentioned this earlier. With this being said, do you think there is a compression issue lowering the range? Or could that be a different thing?
  8. hey guys, I was just wondering if using a type 0 cylinder with a 363 mm barrel could cause compression issues. I'm asking because the range on my gun at the moment is about 70-90 feet after a swapping of the cylinder.
  9. I was using that spring to compensate for my fps issue on my gun, I was shooting 280 fps with the stock spring in the cm, I wanted an fps over 400 to dmr, the techs said the job was done with the cylinder. And what do you mean by overkill? Also, can this affect compression to the point where range is around 90-110 feet?
  10. hey guys, I've got a quick question to ask; can a 363mm barrel take a type o cylinder? I took my gun to a tech to fit in a 140 spring, and they said using this cylinder got the job done without the spring, but as we all know, this can cause compression issues. I'd like to know if this is what is causing range issues on my gun. (G&g cm16-L)
  11. Hey guys, I need some help. I'm looking for an eotech 552 replica/clone. Can anyone point me in the right direction for a quality one, that has trades, and dosen't break the bank? Any help is appreciated, thank you in advance, cheers.
  12. So I will get prometheus, do you think my gearbox can handle te upgrade without cracking?
  13. hey guys, I'm unhappy with my fps and I was thinking about getting a matrix m130 spring spring, I just don't want to crack my GB shell. I've got a sorbo pad in there, along with a pre radius'd cylinder window from G&G, do you think it's safe? thanks for your help in advance!
  14. Hey guys, just did a compression test and my nozzle is leaking, what can I do to fix this, I've got a stock g&g cylinder head, and a lonex nozzle with an o ring. This is in a v2 gearbox. Any help will do, thanks in advance for your help!
  15. Morgan: I believe they are all compatible, no parts are "bore up", they are all regular parts. vike: I'm using the paper in the magwell, paper dosen't move an inch.
  16. cylinder is on correctly, the cylinder head is already teflon'd, the hopup has no air leaking from it what so ever. I really don't know why this is happening, im changing the bucking to a lonex 50 degree, I'll chronoe and see what happens, thanks for replying guys, the more, the better.
  17. Hey guys, just upgraded my AEG with a tbb 6.03 363mm Madbull barrel, a 120 prommy spring, a G&P piston body, along with a Lonex pom piston head, I also got Lonex O ringed air nozzle, and to top it off, I corrected the AOE with a 1/4 sorbo pad. I put all these in my GB, lubed everything up, closed up the box, and chronoed it at 300 fps with .2g bb's, what could be the problem? my gun shoot be shooting at 370 fps at the least. any help is appreciated, thanks in advance for your help! Using stock bucking & nub, Stock hopup, stock gears, stock cylinder, stock spring guide, and stock tappet.
  18. just the trigger, right? also if you're familiar with HPA, what is a good rig for this setup?I don't want to go buy several different things and end up with parts not compatible with each other. thanks again for the reply.
  19. hey guys, not sure if you've heard about it yet, but theres a new HPA system competing against P*, its called the "Wolverine SMP." I'm thinking about getting it, but I have no idea how to setup/use HPA guns, I also do not know the specific items to purchase for this system, all I know is that I need a regulator, a tank, and the tube to connect the system to the tank. I was hoping someone could help me on this, because I'm tired of my AEG's performance, and I don't want to break the bank with a P*. If anyone could point me in the right direction, maybe show me some compatible parts, good air tanks/regulators that would be great. thanks in advance for your help.
  20. I set it on 8.4, 9.6, and all the other battery modes, same thing. what do you think it is?
×
×
  • Create New...