Jump to content

to add your 300x250 banner, pay ad zone 5
Airsoft Atlanta is your source for quality airsoft guns and rifle parts
to add your Text Link here, pay ad zone 3

AirsoftAtlanta.com AirsoftNMore.com Airsplat.com AirsoftRC.com
Vote for us to add your 180x30 banner here, pay ad zone 2

If you appreciate this website, please ASF Donation or Check Out the ASF Store. If you can not help us financially,
then at least help us by telling a friend: Share us on your favorite social networking website Bookmark and Share


  • Content Count

  • Joined

  • Last visited

  • Days Won

  • Feedback


Everything posted by Say10

  1. Hey I appreciate the interest but I quit looking almost a year and a half ago. Good luck selling it though!
  2. Hey Guges, I messaged you, there is a little issue with the receiver.
  3. My lonex gearbox will not fit into the jg receiver no matter how much I file it. Im specifically looking for a G&P or King Arms M4 metal receiver. Not looking for a specific set of trademarks although Colt and VLTOR take priority if they come up. Paint is ok, and minor scratches and scuffs are ok as well. Not looking to spend an arm and a leg but I am flexible depending on which receiver it is.
  4. Sorry to bring this thread back, I recently installed a guarder frame, slide, outer barrel, and recoil spring onto my pistol. Although it looks great its running into some cycling issues again. It has the typical problem where the hammer catches on the nozzle housing so I'm getting a guns modify zero hammer which should solve the problem. But it also is catching on the outer barrel as well. The outer barrel doesn't always tip upwards like it should so the slide gets stuck right before the hammer would hit the nozzle housing. The slide will go back but it won't come forward unless I manually push the barrel up and back. I can't seem to find a solution on the internet so I was wondering if someone has an idea on how to fix it?
  5. That makes sense, I used to have a KWA 1911. I actually just lubed the slide rails and nozzle and tested it, back to normal! Thanks!
  6. Silicon oil lol. Ive been told multiple times that it basically eats away seals and hop up rubbers, I was just wondering if there was something else you recommended. I guess thats a no then?
  7. Oddly enough, the problem seems to have partially self corrected. The rounds are loading fine but the gun isn't locking back when empty. Piston lid and Loading nozzle are in fine condition but could use some lube. I know silicon oil isn't ideal, what should I use?
  8. Hi, it's been a while since I've posted here. I have a totally stock kjw g23 and it's finally giving me issues after 2+ years. It will fire, but the slide does not go back far enough to load a bb. I've heard that the kew guide rods tend to have an issue after a while but mine seems perfectly in tact. I've ruled out the magazines entirely because they work fine with my kjw g27. My guess is that there is an issue with the guide rod or guide rod spring, or possibly a problem with the bbu? haven't had a look at it so I'm not sure. Any suggestions would be great. Thanks in advance!
  9. You could cut the mesh mask to better fit your face. You should be able to bend it a little. An alternative is to use a face wrap like a balaclava (not sure if I spelled it right) doesn't give as much protection but it's much more comfortable. I know a guy that uses a mouth guard of some kind, but it doesn't impede his speech all that much.
  10. ^evike has free shipping on orders over $80 if you use the code freeship
  11. Well you'll need something that has the correct trades on the receiver. For a mk18 mod 0 you'll need the mk18 receiver For a mk18 mod 1 you'll need a colt m4 receiver. Over put a lot of time into building my mk18 mod 1 so I'll be willing to help you out with your questions.
  12. Say10

    Krytac .28 bbs

    Does anyone have any experience with these? My field doesn't require bio bbs, and I'm running low. Just don't want to buy these and they turn out to be trash. I'm beginning to think that my feeding problem is because of my bioshot bbs
  13. John carpenters's "The fog" and not the garbage remake from 2005 To be honest the original was pretty bad too, and I don't know why I like it. The sinister movies were good, tucker and sale vs evil was hilarious, and hot fuzz is a good one.
  14. Any business that isn't a state or federally funded organization can technically refuse to serve anyone for any reason at any time. I support this idea, but also think that if someone is a homophobic, racist, or sexist towards customers, they have to deal with the economic repercussions of their actions without government support for their business.
  15. Well that's a good deal so is say go for it. P* customer service is great
  16. The only difference between the two is that the hydra can use offset nozzles and the inferno can't. The original smp is probably the way I'd go because it's simpler and more user friendly.
  17. 1) look into the wolverine smp. Cheaper and it's a lot more efficient out of the box. (P* can rival it with tuning/upgrades) 2) a lot of places can't fill past 3000 psi, so be aware of what the fill stations in your area can do. No point in having a 4500 if it's only being filled to 3000 3) the lines on amped would all do good. Only thing you should consider is getting a wide bore line. IMO there's not that big of a difference though. 4) make sure if you go with smp or jack to keep your trigger contact screw somewhere you can find it during the install. The hpa kits don't come with one.
  18. Just so you know, the link or the 203 package isn't working.
  19. "Polarstar'd VFC SR-16-$700 -Madbull 6.03 Inner barrel -ASG aluminum hopup with angel custom bucking -ACOG scope, suppressor, and magpul rail covers -Comes with reg/tank, and lipo. KJW m700-$120 -Stock, comes with bi-pod Tokyo Marui mp5k-$160 -Completely stock, amazing gun for its size Not really looking for trades, unless its a Tikka 308 Bolt gun :) If you have any questions, feel free to ask...I can get more/better/different pictures upon request. Edited by Amart, Today, 10:02 AM." ^ for whatever reason it uploaded as a white font.
  20. Super late response but yeah, I guess there wasn't really a problem. Took everything off and did what you suggested. Barrel is fine and then I put the rail back on and it doesn't look crooked anymore. Guess I had it on there weird?
  21. So my barrel itself is straight, but it is just barely off to the left. Everything is tightened down and whatnot. How can I fix this? King arms reciever Madbull mk18 rail 10.3 inch madbull barrel Ps. I know it's probably something really dumb I'm overlooking
  22. When you guys ship a gun out to a buyer in America how do you go about the orange tip? Threading on an orange flash hider and putting the black one in the box? Or just simply painting the one in there already? I've heard that orange plasti-dip works and comes off easier than paint. Or do you just not worry about it? Asking because I have a WTS post on FB and want to avoid legal trouble
  • Create New...