Jump to content

Hunter74

Member
  • Content Count

    8
  • Joined

  • Last visited

  • Feedback

    %

Community Reputation

0 Neutral

About Hunter74

  • Rank
    ASF Immigrant
  • Birthday July 16

Profile Information

  • Gender
    Male
  • Location
    Colorado

Previous Fields

  • Airsoft Replicas Owned
    HFC M9 w/ WE Socom Upper Frankenstein Sopmod Block II
  1. I have been looking at call signs for a while now and always wanted one but I have no idea what to put on it. I am not talking about actual words, I'm talking about the letters and numbers that seem random. Also, if you can, tell me what the letters and numbers are supposed to mean. Are they just random? Thanks.
  2. If you are talking about traditional call signs this is the place to go: http://www.rangerjoes.com/Patch-Call-Sign-P3088.aspx
  3. I have an HFC GBB M9 and I never put much thought into it but now that I did I noticed the trigger has practically no "break". The build up and the break have virtually no difference in feel or tension so it is very difficult to know when it is about to go off. My question is, is there an upgraded trigger that has a distinguished build up and break that I can install for a low price? Anything helps. Thanks.
  4. So I have been looking online for a very long time now and have not been able to find a halfway decent full metal body that is $50 or below. The closest I've come is a Golden Eagle receiver from airsoftmegastore.com but I can't be positive on the quality. If anyone knows of a cheap and good metal body/receiver let me know. Also if possible at this price, I would like colt trademarks because it is a sopmod block II build. Anything helps!!! Thanks.
  5. I switched to my old gearbox shell and modded it a bit so the bevel could be raised. It sounds much better but still has a little whine left. Anyways, changing the shell raised my fps to 380-400 range which is right where I want it. Thanks for all your help though!!!
  6. The MB Hop-up is actually just hard to m-nub, which I haven't done yet. The thing is it was shooting around 390 fps before I upgraded the cylinder and spring. The barrel assembly was exactly how it is now before I the previous 2 upgrades. I got even better compression with the upgrades and the spring felt much stiffer. But, I did switch to the APS gearbox shell after these upgrades because I liked the QC spring guide feature and it had more space for shimming my bevel as it was pressing on my pinion more than it should, which made a horrible squelch. Also the magic box 5.9 mm bushings were too lose in the shell and gluing them could have made the gears lock up. I am looking to get a new shell anyways. The only one that looked decent enough within my price range on amazon was this one: http://www.amazon.com/Airsoft-Bearing-Reinforced-Gearbox-Shell/dp/B00GFG58HI/ref=sr_1_1?ie=UTF8&qid=1422722773&sr=8-1&keywords=e%26c+gearbox+shell I can't be positive on the quality as I have found no reviews. As long as it isn't a tight fit around the bevel I think I might get it. Also I will try the barrel shimming method. Thanks.
  7. Parts: Madbull 3-in-1 hopup Madbull m120 IR-Hop Unknown bucking ZCI 6.02mm steel tightbore ZCI aluminum cylinder head (teflon taped and sorbo) ZCI aluminum piston head ZCI air nozzle with o-ring Modify type 1 cylinder (installed correctly) Unknown tappet plate APS Hybrid Gearbox shell If the problem is the bucking could you guide me towards one without the mound so I don't have to remove it for the IR-Hop.
  8. My gearbox is giving me all sorts of problems ever since I upgraded it. I have no idea why as the only upgrades I last did were a new gear set and mosfet. My problem deals with fps though. Problems First the cylinder to piston and cylinder to cylinder head air seal was terrible but that is mostly fixed and I changed the spring too but it is only shooting 360 fps and the spring is an m120 so it should be shooting hotter than 360 fps. When I test the gearbox without the barrel, the air is powerful. When I pressed the hopup to the gearbox and turn it upside down to do the air nozzle to bucking seal test, the air does blow out into the mag well but I have to hold the barrel just right, other wise it seals fine. After the test I sanded the tappet plate to fix the problem, but instead I got the same exact fps AND now the bbs feed horribly as if the air nozzle is too far forward, blocking the bbs. I only have $30 to spend on amazon (because it is a gift card) on upgrade parts. All help is appreciated. Thanks.
×
×
  • Create New...