Jump to content

mrbeny127

Member
  • Content Count

    311
  • Joined

  • Last visited

  • Days Won

    1
  • Feedback

    %

Everything posted by mrbeny127

  1. dude that's why research is needed. I do all mine and got a 30 rps build running a torque motor and standard gears.
  2. anything from amazon isn't that good hombre. I mean except compression parts but that's bout it. evike is the way to goooooo
  3. vfc 420mm inner barrel. amazing quality, good accuracy increase from personal experience. $40 too
  4. Jesus Christ dude just take it to an effing tech. youre running through hundreds of dollars of parts. I think it's time to swallow pride and just say "I need practice because I'm garb at this. lemme take it to a tech." jeez dude. never heard of anyone burn out a motor that fast. not trying to make you feel like crap but I'm trying to give you some constructive criticism.
  5. 1. do you have AB? 2. check the motor brushes when holding the trigger while the motor is out in your hand. 3. if it does the same when in your hand, you need to probably clean the motor haft because of carbon residue buildup
  6. sounds like a bad bucking. a video would be very nice
  7. And the fuse is not a problem. I've checked without the fuse
  8. guys I'm on the verge of tears. I have spent well over $300 on my build and just got a new motor by asg not too long ago. I'm going to tennessee tomorrow and I need answers. my motor will stop working randomly and I can't take it apart. Here is a video please answer
  9. THERES NOOOOOOOOOO WAY. OMG OMG OMG OMG OMG OMG OMG OMG OMG OMG OMG OMG
  10. tissue paper test? like put it sort of between the barrel and hopup or what?
  11. I figured it out. ;;;)))))) the gears and piston weren't greased as well as I thought. so wasn't the tappet plate. btw everything except the gears and contact box are shs.
  12. nothing is stock..... XD
  13. do you have instagram? this would be much easier on there mine is lone_airsoft
  14. I have an enjoi skateboard with longboard wheels, thunder trucks, and pacific flyer bearings. would you be able to trade the frankengun for it?
  15. yeah I guess. I mean the motor gets pretty hot. ill downgrade it to a "160%"/ m113 (yes I know theres no such thing but it's what they put. I think it's an equivalent to an m120) spring that evike sent me with my mystery box. all I gotta do is run it through my gearbox for about a minute on 30 rps and it'll clear the metal crap that comes off of it.
  16. I knew someone was gonna ask that. it is a new COL. I was on zacko's youtube earlier and saw my sector gear was engaging the lever at 1/2 to 3/4 of the cycle. where all the teeth face the back of the gearbox. I have no idea how to fix this?
  17. yep. 30000 rpm motor, mosfet, deans, 16awg, ics gears, 11.1v.
  18. I mean the piston is halfway in cycle after every semi auto shot. like a pre cocking mechanism
  19. hey guys so I short stroked two teeth off sector gear and (by mistake) short stroked 3 teeth off full steel piston rack. now I'm using an m130 and IM STILL GETTING OVERSPIN. any idea of how to fix this? By the way, I'm running an 11.1v. due to m130, the 7.4v wont cut it
  20. oh. okay. I will let you know when I will buy them
  21. really? man that would be very helpful. how much for 2?
  22. I know that quote.... ive decided to order a lonex gearbox shell and a new piston because the one I put in (with an m130) stripped. AN M130!!!! Jeez. it was a half rack piston too.
  23. they were as flush as I could get them. v3 gearboxes with 7mm bushings have the bushings sit out of the holes. leaving the room for shimming taken up. ive come to the conclusion that if I take off more material from he bevel gear bushing, and if it still does that weird noise, I'm going to buy new bushings. I'm just so frustrated after all the work I put into this thing and right before I get parts to complete this, it does some bull crap.
×
×
  • Create New...