Jump to content

Tosh_

Member
  • Content Count

    3
  • Joined

  • Last visited

  • Feedback

    %

Community Reputation

0 Neutral

About Tosh_

  • Rank
    ASF Immigrant
  1. Would you explain me why ? Someone suggested that to me on reddit, and I thought that would make sense. Yes it is my first build. Anyway, I'll try with the stock hammer spring as the UAC one is stiffer and makes the hammer harder to get cocked.
  2. I changed some parts like the hammer, the sear with the spring and the hammer spring. I noticed that the slide gets tight when the hammer bearing meets the "bump" on the BBU, which helps the hammer to be cocked. http://www.noelshack.com/2017-40-5-1507255485-duof4fitsvm07jgxh9w-ya-thumb-274f.jpg I don't know how to fix this, maybe a 150% recoil spring would help ? I already changed it with an improved one from UAC but it doesn't seem to be strong enough.
  3. Hello, I just upgraded my TM M&P 9 V with a Nova metal slide and some UAC part but now, as you can see, the slide get stuck on the way back after each shot, so I have to manually push it back. http://www.noelshack.com/2017-40-4-1507236771-unadjustednonraw-thumb-2751.jpg I don't know if it's because of the UAC part I put (sear, hammer, hammer spring) in the frame but I found out that the slide get stuck at some point when the hammer bearing touch the blow back unit. http://www.noelshack.com/2017-40-4-1507236771-unadjustednonraw-thumb-2750.jpg http://www.noelshack.com/2017-40-4-1507236771-unadjustednonraw-thumb-274f.jpg On the BBU, the hammer bearing get stuck on the metal part on the right of the nozzle (see on the picture). So anybody have an idea of how I could fix this ? Maybe sand the metal part on the BBU ? Also I lubed all the parts well enough but it's still too tight to slide freely.
×
×
  • Create New...