to add your 300x250 banner, pay ad zone 5
Airsoft Atlanta is your source for quality airsoft guns and rifle parts
to add your Text Link here, pay ad zone 3
to add your 180x30 banner here, pay ad zone 2
then at least help us by telling a friend: Share us on your favorite social networking website
Search the Community
Showing results for tags 'Electrical problem'.
Found 1 result
So, I have this G&G SRXL fully stock, and somehow not working fully. I have a 9.6v 1600mah NiMh battery to power the G&G ETU and MOSFET package, (which was replaced after one burned out) and a Matrix 3000 motor- only real modification. The gun worked perfectly out of the box, but I wanted to shim and make it silenced. So, I epoxied the bushings in with JB weld and perfectly shimmed the gears- they spin perfectly free without the spring, tappet, and piston and such in. The motor spins them perfectly free and almost perfectly silent. Now, however, when I have the firing set up in (spring piston and such) with the gearbox fully assembled, perfect motor height, and shim job. The gun only cycles half way and stops. The motor tries to turn the gears but fails and makes an audible "tick" as I pull the trigger trying to push the stuck gears. Although I can manually spin the gears with a flat head and fully cycle the gun. I have been told its not the battery and the motor is definitely powerful enough to spin the gear set, whats wrong?