Search the Community
Showing results for tags 'M1911'.
Found 4 results
Hi there, I'm new to Gas airsoft rifles and pistols, so bare with me I just bought a WE Tech M1911 green gas pistol from evike.com. It had the option to put a zodiac on it. I asked a friend, he's been doing AS for 9+ years he told me it was a good brand, well made. So I got it, along with silicone spray lubricant, elite force Bbs, green gas (has a lion on the can) Well, I've dry fired it twice, I field stripped it a few times and put it back the right way. As I have done it to my fiends Elite force 1911 tac. I was surprised to find out that the piece at the end of the spring, that goes inside doesn't have an insert on this gun to hold it in place as I reassemble it. I thought that would be a useful piece for finding the cure. Problem: I fill the gas, load the mag, and fire, and the gas comes out the end of the barrel, following the single bb. The slide doesn't fully come back either. Then it's out of green gas. I checked the gas intake, it's not mucky, or grimy as if clogged What happened?! What do I do?! Please help
Hi! My name is Sturm and I recently have registered. I am here because bloody hell I have some things going on with my pistol. Long story short, I ordered a custom TM M1911A1 Government from Hong Kong. I had it fitted by the retailer with a full Guarder metal kit, including the slide and frame, springs, and steel outer barrel. Okay. Everything was fine, lest for one thing. The outer barrel had an out of place 'jumpy' movement to it. It would wiggle around in the slide, and would specifically protrude out of the end of the gun more than normal. It took a tonne of guessing and experimenting, but eventually I believe I discovered what was causing it. For whatever reason, the Guarder chamber piece had a large amount of clearance between the top of it and the ejection port on the slide. The result of this happening was that the entire outer barrel was afforded more space than it needed, and would slide around after cocking, firing, aiming, etc. This is why the outer barrel tended to spring itself a little bit out of the end of the slide. I think part of the problem is the default Marui hop up, which is a bit stiff and obviously made for the likes of plastic outer barrels. Today, I attempted to do some 'fitting' on the hop up unit and a spare Guarder outer barrel I had handy. After I made some modifications, I reassembled the pistol, and to my shock, the pistol was jammed to hell. I could not even take the gun apart even with the slide lock out! I eventually managed to fix the jamming, but I still cannot disassemble the pistol, slide lock or not. I lubed everything, and the slide will still not budge off of the frame. I don't know why this even happened in the first place. The original jam was very strange, so misaligned that the slide stop could not even be placed back on! I fixed that part, but for whatever reason I cannot disassemble the slide from the frame. So, basically, I had a problem, and when trying to fix it, I created another one. Any advice? I would still appreciate any help I could get with the barrel/chamber fiasco as well. I accomplished nothing in my endeavours this afternoon. I just screwed things up more. When I solve this disassembly bit of SNAFU, I might buy an aftermarket hop up, either from Airsoft Surgeon or from Nova. After all of this crap, I hope one of those units will actually fix my OCD-driven nightmare. Well, if anyone got through that text wall, I would greatly appreciate any assistance you can give in regards to the two of my pistol problems.
NEW ARRIVALS: KWA Full Metal U.S. Army M1911A1 Gas Blowback GBB Airsoft Pistol Don't forget to shop for NEW ARRIVALS at Airsoft Megastore for the latest airsoft guns and gear. KWA Full Metal G.I. WWII M1911A1 Gas Blowback GBB Airsoft Pistol [ADD TO YOUR ARSENAL] You Might Also Like WE Tech Full Metal M4 CQB RIS Airsoft AEG Rifle KWA KZ61 Skorpion GBB Gas Blowback Airsoft Machine Pistol Beta Project Magpul PTS G.I. MOE M4 Mid-Length AEG Rifle WELL Full-Auto MAC-11 Gas Blowback Airsoft Submachine Gun Connect With Us Wed love for you to subscribe to our channel and, more importantly, connect with us either on Youtube or Facebook. Let us know your thoughts about the all-new Airsoft Megastore TV. Wed love to hear them! Just comment directly on the video or post up your feedback on our Facebook page. [MORE NEW ARRIVALS] Join Us: YouTube: Airsoft Megastore YouTube Channel Blog: Bring Airsoft To The Masses » Airsoft Megastore TV Facebook: Airsoft Megastore | Facebook Twitter: Airsoft Megastore (airsoftms) on Twitter
Hello all, Up for sale is my gently used KJW M1911 (GBB-609). Full metal replica of the Colt 1911 and based on the Tokyo Marui TM 1911 platform. This includes x2 KJW green gas magazines, optional follower tool, original papers, and original box. No green gas or BBs are included with this. The orange cap is not included but I'll put a little orange tape on the tip before sending it out. Everything works great and there's just some scratches on the tip of the outer barrel. One of the two magazine's feed lips is slightly damaged and could be repaired by an aftermarket replacement. $75 shipped! - Please send me a private message for most-organized response. If the forum is down, you can try to email me at albertysales [at] gmail [dot] com. - Shipping & selling to CONUS only, no international buyers please. - Payment with PayPal Pictures: Verification image: