to add your 300x250 banner, pay ad zone 5
Airsoft Atlanta is your source for quality airsoft guns and rifle parts
to add your Text Link here, pay ad zone 3
to add your 180x30 banner here, pay ad zone 2
then at least help us by telling a friend: Share us on your favorite social networking website
Search the Community
Showing results for tags 'Split Gearbox'.
Found 2 results
Hey guys, so I have an ICS Par Mk3 CQB (10.5 inch outer barrel) that I am trying to upgrade for trigger response and increase ROF. Parts I have purchased so far: - SHS 13:1 Gears - SHS Sector Gear chip - SHS High Torque Motor - JBU M100 Spring/ Stock ICS M120 Spring - Madbull Ball Bearing Spring Guide - Turnigy 11.1V 1,800 Mah 25-40C LiPo - Nukefet from BrillArmory - Deans Connectors Everything else is stock. Some info about the stock parts: - 6 (or 8?) metal tooth ICS Piston - Type 1 ICS Cylinder - Plastic Cylinder Head So my question is, would this setup with the M100 spring cause premature engagement? What about an M110? My goal is to reach anywhere around 28-35 rps, with a max of ~375 Fps. I have heard that putting the M120 and short stroking would get rid of any PE, but I'm trying not to modify the gears at all. I was also told that short stroking may cause some issues regarding cylinder volume, as well as tappet plate engagement issues. Anyone have any ideas on what I should do? I'm mostly going to shoot on semi, as my local fields don't allow for full auto, so the PE shouldn't be too big of an issue, but I still want to be able to shoot full auto without destroying my piston. Thanks in advance!
Hey everyone! This is my first post on an airsoft forum, and I just had a couple questions. I am sort of a noob when it comes to internal gearbox upgrades. I recently bought an ICS Par MK3 from Evike, and am looking to upgrade it for CQB use. Most of the CQB fields around me don't allow for full auto, so I am looking for something with great trigger response, at about 360-370 fps. I will also be using an 11.1v LiPo. So far, these are the only upgrades I have done. - ZCI Balanced Motor with SHS pinion (http://www.brillarmory.com/index.php?main_page=product_info&cPath=39_65&products_id=188) - JBU m100 Spring (https://www.hobbytron.com/JBUM100MetalSpringHeatTreated.html#35155) - Madbull Ultimate Ball Bearing Spring Guide (http://www.evike.com/products/38825/) I am looking to add a Gate Titan Mosfet (also looked at BTC Spectre and Chimera but these seem to be impossible to get), and possibly SHS or ZCI high-speed gear set (13:1 or 16:1). Is paying ~$150 worth it for a mosfet? Also, will the ICS split gearbox fit the Titan and 13:1 gears without modification? and is the 16:1 gearset even worth upgrading from the stock 18:1 ICS gearset? I will be correcting AOE, reshimming, and attaching deans connectors to just about everything. My budget for the gearbox is about $200 including a mosfet, and I will be doing accuracy/ compression upgrades in the near future. Any suggestions/inputs would be greatly appreciated. Thank you!