to add your 300x250 banner, pay ad zone 5
Airsoft Atlanta is your source for quality airsoft guns and rifle parts
to add your Text Link here, pay ad zone 3
to add your 180x30 banner here, pay ad zone 2
then at least help us by telling a friend: Share us on your favorite social networking website
Search the Community
Showing results for tags 'combatmachine'.
Found 2 results
Alright so I have had my combat machine for around 3 years. Its the high velocity long barrel version. While I have had it for a while, I have only played about 120 full match days with it. I am using a 9.6v butterfly tattu battery. The past 2 times when I have gone out to play the gun has been misfiring like crazy. Whenever I pull the trigger, I can hear the motor fire, but nothing comes out. I can fire maybe one or two more times and then either 2 bbs come out or one which curves down and doesnt go more then 15 feet. Then I will finally get one bb that goes the normal velocity, although even though my hop up is set to the maximum upward curve, or basically off, it still curves down faster then it should. I have cleaned the barrel and have checked the hop up mechanism. I have tried using a non stock mag and still have the same issue. My friend also lubed a couple bbs and while that helped a tiny tiny bit, its still not working right. I do think there is a tiny short in the connection to the battery, as if I move the wires that go from the battery to the fuse housing too much it will loose power. Every time I pull the trigger tho it does "fire". I am willing to take things apart if needed.
Hello everyone I need help to upgrade the fps on my weapon g&g CM16, this are the upgrades the weapon already have: -Mad bull Black Python tight bore inner barrel 6.03mm (407mm) -Prometheus Neo strike Hop up Chamber -Prometheus Soft Bucking -Lonex A-1 motor -AOE Corrected -Prometheus ms120 -SHS cylinder type 0 Right now with the prometheus m120 spring my gun is around 380 fps and I want a little bit more, after reading this guide (http://www.airsoftforum.com/board/topic/97249-aeg-upgrading-guide/) (awesome guide) this is the list of the upgrades I'm thinking to buy: -SHS 8mm bushings (http://www.evike.com/products/46930) -Prometheus m135 (http://www.evike.com/products/32454) -Lonex Bearing Spring guide (http://www.evike.com/products/35848) -Lonex Red Piston (http://www.evike.com/products/37851) -Guarder Cylinder Head (http://www.evike.com/products/26505) -Lonex Polycarbonate pistonhead (http://www.evike.com/products/44787) -Guarder infinite torque gears (http://www.evike.com/products/27212) (not sure if my stock g&g gears can handle that spring) I'm open to suggestions, I'm not sure if the gears, piston or piston head are the best choice or if I need to upgrade something else in the gearbox to handle a prometheus m135 spring thanks in advance!