to add your 300x250 banner, pay ad zone 5
Airsoft Atlanta is your source for quality airsoft guns and rifle parts
to add your Text Link here, pay ad zone 3
to add your 180x30 banner here, pay ad zone 2
then at least help us by telling a friend: Share us on your favorite social networking website
Search the Community
Showing results for tags 'm170'.
The search index is currently processing. Current results may not be complete.
Found 1 result
So, I am thinking about building a DSG with an insane ROF and standard CQB FPS. Is there anything that is going to blow up with this setup? 16 AWG low resistance wiring GATE nanoABB 3rd Gen MOSFET http://www.evike.com/products/47824/ Deans SHS Trigger contacts 6mmproshop high speed high torque motor http://www.evike.com/products/51834/ or the Tienly version of this RiotSC DSG 8 tooth 10:1 gearset short stroked to 330ish fps m170 spring 250mm 6.01mm tightbore barrel lonex 70 degree soft bucking Lonex 15 tooth piston shortstroked and swiss cheesed. Tappet plate modified for DSG Shim job, Radiused gearbox and re-greased with white lithium grease. (the gun comes with good AOE as it is, so long as the new piston doesn't mess it up.) BOLT 65-130 CC 5400 MAH 11.1v LiPo everything else that comes stock in this gun http://www.evike.com/products/42392/ Will this blow up? If so why? Will the motor burn out with that spring? Will the lack of Sorbo and neoprene break the front of the gearbox? Should I not short stroke DSG gears? I wanted to use the m170 to avoid pre-engagement. What would the RPS look like? Will trigger response be slow because of the high speed motor? What would RPS be like with a Frankentorque motor?