Search the Community
Showing results for tags 'ns2'.
Found 3 results
I have a brand new (Well, about a month old) KWA Ns2 Mac-11 I bought from Evike for about $130 and I did have a lot of fun with this outside. Although I took off the ugly yellow warning stickers on the gun and magazine, I listened to them and always pulled back the bolt before loading in the full magazine in order to prevent the nozzle from breaking. In the end, this gun was performing fine, until today. Today, I planned to shoot a lot from the gun and that's what I just did. On the last clip however, the gun just died all of a sudden and it no longer fired. I checked to see the problem and I realized that the crappy plastic nozzle broke inside the bolt assembly. I was upset. I knew Evike and other places were selling the nozzle for about $14, so I disassembled the gun and got to the bolt assembly. This is where the hit the fan. On the assembly were three screws. I tried to twist them off with a screwdriver counter-clockwise, but in the end I stripped almost all the screws since they were all screwed in extremely tightly, making it hard or impossible to unscrew again. These screws need to be removed according to the manual in order to replace the nozzle. I thought about giving the gun to Evike or KWA to fix, but I doubt they will do something about it. I looked for a tutorial on YouTube and Google that can explain how to do this, but there was literally NOTHING on the subject. I searched for any websites that were selling the bolt assembly for the gun rather than the nozzle but there was nothing other than an assembly for the HFC Mac 11, which was sold out and for NS1. Is there any place I can send the gun to for repairs? Is there any store that sells bolt assemblies for KWA? Is there a way to remove the stripped screws? I REFUSE to buy a new gun or keep the one I have as some movie prop!
Hello up for sale is a KWA M11A1 airsoft NS2 SMG. This airsoft fires good and true as if new. This package includes the following: -KWA M11A1 NS2 w/ manual -2 Magazines -UTG Drop Leg holster -CNC Polar Star mock suppressor -Installed G&P upper kit -Spare KWA parts The installed G&P kit includes a steel stock with authentic Cobray trademark, steel threaded flash hider, steel upper receiver and rubber grip. The spare KWA parts are pretty much the same but original KWA versions...a metal threaded flash hider, plastic w/ metal lining upper receiver, hard plastic grip and metal stock. The entire package is in very good condition with only minor flaws. Those flaws include a crack around the rear sight, which is common due to the blowback. (pictured) It won't get any bigger and I already cemented it just in case anyhow. There is also a tiny crack by the front pin which I did on accident trying to install that said pin. These flaws do not hurt the functionality nor longevity of this gun at all, it will last for years, this is my third one. I always find myself quitting airsoft then getting back in! If this bothers you, the original KSC frames are available almost anywhere for replacement, just ask me and I'll show you where and how to install it. Anyhow, the kit I installed fixes all of of problems that came default out of the box. Normally the flash hider would wobble with a barrel extension on, now it doesn't due to the tension pin. The stock is much more reliable and sturdy for those full-auto moments. The grip is now actually rubber which feels great in comparison with the default plastic one. And it goes without saying how realistic it feels altogether and you don't even have to do the intense work it takes to install that steel upper receiver. Also, the Polar Star mock suppressor is the best one out there, which is also discontinued, so getting it here with the airsoft is truly a rare moment. This package is lubed and ready to go right out of the box, guaranteed. Anyhow, thanks for reading my novel of a description, but if I don't give proper detail, that would be deceit! Feel free to ask anything you like. Thanks! -E I am asking $250 OBO shipped. As for trades/partial trades I am looking for only GBB/GBBR related guns. To ASF members: This is my first time on here in a very long time, just getting back into airsoft, so please forgive me if I forgot some of the forum rules.
Hey, hello forum! Today whilst browsing through UNcompany, I found these aluminum outer barrels for the KWA NS2 (aka KSC system 7) m9/93r pistols. These include:Normal, Threaded and three compensated barrels. Links below: Normal: http://www.uncompany.com/pageproductdetails.asp?prodid=35317 Threaded: http://www.uncompany.com/pageproductdetails.asp?prodid=35318 Compensated: http://www.uncompany.com/pageproductdetails.asp?prodid=35530 Compensated #2: http://www.uncompany.com/pageproductdetails.asp?prodid=35529 Compensated #3: http://www.uncompany.com/pageproductdetails.asp?prodid=35531 Note: Compensated barrels have an extended 6.03 thighbore inner barrel.