|
to add your 300x250 banner, pay ad zone 5 |
Airsoft Atlanta is your source for quality airsoft guns and rifle parts
to add your Text Link here, pay ad zone 3 
  or Check Out the ASF Store. If you can not help us financially, then at least help us by telling a friend: Share us on your favorite social networking website 
|
|
Search the Community
Showing results for tags 'shim'.
Found 2 results
-
hey guys so I got a bit of a problem. my ak has almost perfect shimming with sound from the bevel and pinion from the gearbox. the bevel and pinion are meshing perfectly. but the problem is the bevel gear is rubbing on the bottom of the gb. it has about 1.5mm of play. should I add about another .1mm of shims on the bottom? because I'm trying to get the least amount of noise out of my gb. the reason I heard this sound is going from an 11.1v to 7.4v. I mean I'm going to use 9.6v nimh most of the time and I don't want the noise I'm hearing right now.
-
So I recently upgraded my Classic Army M15A4 spring to a SHS M130 and when I went to test it out, the gearbox would move a little and lock. The gears had already been upgraded, although I don't know what the ratio is (it was a while back and a Airsoft Atlanta fixed my gears after they had worn out), the stock motor is in (this one), and my battery is a Tenergy 9.6v 1600maH 10C. I figure that I either need to upgrade the battery or the motor, and would rather do which ever is cheaper. Does anyone know which I should upgrade? When I changed the spring everything came out and I had to re-shim the gears. I think I did it alright, but maybe doing it better would get it to work? It works with the stock spring shimmed the way it is now.
