Search the Community
Showing results for tags 'spr'.
Found 3 results
hey so my gun is having feeding issues again. EVEN WITH A SECTOR CHIP. at first it fed fine with the sector chip. now it's not. 11.1v doesn't work. 9.6 and below does. tappet plate is stock. tried putting another stock tappet plate in there. same thing. any ideas? should I get a new tappet that's reinforced? I was looking at shs EDIT: I'm also having overspin even with a new steel COL. only on 11.1. should I get a stronger spring for this?
I am thinking of getting a Krytac spr to upgrade to a dmr. I want to get it because it comes with good internals so I could mostly work on accuracy. The quick change spring also is a plus because I play at different places with different fps limits. I am open to suggestions if someone thinks a different gun would be better but I want it to be an m4 because I have an elite Tavor and I can't take another gun with tones of proprietary parts. If you think the Krytac would be a good base I would really appreciate advice about how I would go about turning it into a dmr. Thanks
Hey guys, This is my first post here and I need some suggestions with upgrades. The following is what I currently have in my KWA. Keep in mind, I am making this a dmr. Current: -G&G Green -363 mm Bravo 6.03 -Shimmed by tech -KWA brand M120 spring (replacement) I didn't want to do too much off the bat, KWA has good internals to start with. Proposed: -R-hop'd G&G green -550 mm Prometheus 6.03 -Lonex A2 High Torque/ Long Type -11.1 15c Lipo -Wire to Deans -Mosfet -Spring: since KWA has a shorter spring, would a normal length m120 have me shooting around 390 w/.25s? Anything else is greatly appreciated I'm looking for better consistency and accuracy past what it currently shoots: Around and above 250 ft effective range.