Jump to content
Timmy the evil

kjw m700 + AEG barrel

Recommended Posts

Ok so I have a KJW M700, and I have a Matrix 6.03 590mm tight bore I want to put in it.

How would I go about modifying it to fit?

Thanks,

Timmy

You're really supposed to cut the groove for the hop-up into the barrel, but you can get away without doing it if you just put it on there and clamp the hop-up unit down. Try and find a lathe, or a dremel and steady hand to cut the groove later. The vsr bucking has a ring of rubber at the end toward the muzzle that helps with airseal. you will cut a groove for that to fit into. try and find a vsr or bar-10 barrel to look at exactly what you need to do.

Im not sure if 590 mm is long enough to reach the barrel cap to stabilize the barrel though, it might be short by an inch or so. Test it first like I said before cutting it.

Share this post


Link to post
Share on other sites
You're really supposed to cut the groove for the hop-up into the barrel, but you can get away without doing it if you just put it on there and clamp the hop-up unit down. Try and find a lathe, or a dremel and steady hand to cut the groove later. The vsr bucking has a ring of rubber at the end toward the muzzle that helps with airseal. you will cut a groove for that to fit into. try and find a vsr or bar-10 barrel to look at exactly what you need to do.

Im not sure if 590 mm is long enough to reach the barrel cap to stabilize the barrel though, it might be short by an inch or so. Test it first like I said before cutting it.

thanks man.

um I think im going to shorten the outer barrel or just make e-tape barrel spacers which I already was going to do.

Thanks again,

Timmy

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...