Jump to content

to add your 300x250 banner, pay ad zone 5
Airsoft Atlanta is your source for quality airsoft guns and rifle parts
to add your Text Link here, pay ad zone 3

AirsoftAtlanta.com AirsoftNMore.com Airsplat.com AirsoftRC.com
Vote for us to add your 180x30 banner here, pay ad zone 2

If you appreciate this website, please ASF Donation or Check Out the ASF Store. If you can not help us financially,
then at least help us by telling a friend: Share us on your favorite social networking website Bookmark and Share
Dax981

UTG Type 96 D.I.Y Mods and Upgrades

Recommended Posts

So I know there are tons of threads that are almost the same as this one, and if I spent more time looking at them I could probably find my answer, but I am in the process of upgrading my UTG Type 96 and was wondering if the parts I have chosen will yield good results. I also am planning on doing some D.I.Y mods but am not sure which mods to do on my rifle. My prior research on upgrade parts directed me toward buying a new trigger assembly, more specifically a zero trigger, as well as a new hopup unit . A lot of people say that a PDI hopup unit is a good choice. I am trying to buy most of the parts on evike but I do not see a PDI hopup unit so instead I chose a pps unit that is an exact copy. I already have a 500mm r-hop AEG barrel that I bought from a friend. Correct my if I am wrong but a PDI hopup unit uses normal aeg barrels, buckings, etc. I know that I am going to need to upgrade my piston, cylinder head, spring guide, and spring but I am not sure what parts to buy, being that there are so many available. Can someone please recommend some parts that will work well and also some mods that can help improve performance. I would also like a recommendation for hopup bucking/nub. Thanks

 

Hopup unit: http://www.evike.com/products/43007/

 

Trigger System: http://www.evike.com/products/42046/

 

Barrel: http://www.evike.com/products/61984/

Share this post


Link to post
Share on other sites

For the hopup unit, I like Action Army (http://www.action-army.com/images/parts/EDM/TYPE96_HopUp-chamber/chamber.htm) (http://www.PLEASE DO NOT LINK TO EBAY SITES. COPY AND PASTE AD DETAILS HERE - THEIR ADS GO AWAY AFTER 90 DAYS/itm/Action-Army-B02-009-Type-96-Hop-Up-Chamber-for-Maruzen-APS2-UTG-Taiwan-/122294993981?hash=item1c7959843d:g:BaMAAOSwAuNW3lJQ) It offers a great air seal.

Do not buy the Angel Custom trigger (or for that matter, almost anything by Angel Custom). The trigger I use for value and performance is this one: http://airsoftpro.cz/en/gun-parts-upgrade/sniper-rifles-parts/for-well-mb01-4-5-8-14/cnc-spoustovy-mechanismus-l96-pro-mb01-04-05-08...-gen.2-detail

AirsoftPro is a Czech Republic joint, with a great reputation, esp. among the EU airsoft players. I regularly buy from them (I am in the US) and have never had an issue.

For the barrel, once again I prefer Action Army. Note that, if you decide to use the AA hopup chamber that I have recommended above, you MUST use an AEG barrel (and an AEG bucking and an AEG nub, see below), even though you have an L96 rifle.

I use the Action Army 510 mm 6.03 (D01-008) in my L96: (http://www.PLEASE DO NOT LINK TO EBAY SITES. COPY AND PASTE AD DETAILS HERE - THEIR ADS GO AWAY AFTER 90 DAYS/itm/Action-Army-6-03mm-510mm-M16A2-Precision-AEG-Airsoft-Inner-Barrel-D01-008-/122329347106?hash=item1c7b65b422:g:w~kAAMXQ0pNRqXH7).

And again, assuming that you are using the AA hopup chamber, the bucking I use with it is this: (https://www.airsoftatlanta.com/products/maple-leaf-aeg-rubber-70-degree) and the nub is this: (https://www.airsoftatlanta.com/products/maple-leaf-aeg-hop-up-tensioner-omega)

Edited by jacksan121

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...