Jump to content

to add your 300x250 banner, pay ad zone 5
Airsoft Atlanta is your source for quality airsoft guns and rifle parts
to add your Text Link here, pay ad zone 3

AirsoftAtlanta.com AirsoftNMore.com Airsplat.com AirsoftRC.com
Vote for us to add your 180x30 banner here, pay ad zone 2

If you appreciate this website, please ASF Donation or Check Out the ASF Store. If you can not help us financially,
then at least help us by telling a friend: Share us on your favorite social networking website Bookmark and Share

Recommended Posts

Does anyone have instructions on the disassembly of a TM Combat Delta EBB ? I am mainly looking to remove the slide as the hop up rubber boot was dislodged when I had a stuck pellet removed with the 'un-jamming' tool. I should be able to put the hop up back in from the top, no ?

 

Any help would be appreciated.

 

Thanks

:a-confused:

Share this post


Link to post
Share on other sites
Does anyone have instructions on the disassembly of a TM Combat Delta EBB ? I am mainly looking to remove the slide as the hop up rubber boot was dislodged when I had a stuck pellet removed with the 'un-jamming' tool. I should be able to put the hop up back in from the top, no ?

 

Any help would be appreciated.

 

Thanks

:a-confused:

 

The only way to put the hop-up back in (in addition to taking off the slide) is to pretty much disassemble the whole pistol.

Share this post


Link to post
Share on other sites

Hey there,

 

I know its been a long time since this thread was started, but this was the only reference I could find in the whole internet regarding this problem.

 

I experienced the same problem as the autor of the thread, but in my case it was even worse because when I inserted the unjamming tool I accidentaly disengaged the hop up rubber and it dropped through the magazine slot, thus, getting lost without giving me a chance to noticed it.

 

Tried tokyo marui web site, but no exploded view of this gun is available.

 

I just need to know (by pictures) what the missing parts look like so that I can try to fix it.

 

Could anyone who own this pistol post a picture of the hopup system so that I can identify what is missing in mine?

 

Tks in advance.

Share this post


Link to post
Share on other sites

Does anyone have instructions on the disassembly of a TM Combat Delta EBB ? I am mainly looking to remove the slide as the hop up rubber boot was dislodged when I had a stuck pellet removed with the 'un-jamming' tool. I should be able to put the hop up back in from the top, no ?

 

Any help would be appreciated.

here's a photo from taking apart mine...

 

combat2

marui combat delta

Share this post


Link to post
Share on other sites
On 10/25/2016 at 9:25 PM, abrave said:

here's a photo from taking apart mine...

 

combat2

marui combat delta

I will caveat this, however, that the anti-reversal latch is misplaced in these pictures. It should be surrounded by the motor, the gears and the "mag well" (or rather "mag groove"), as seen in the photo attached to this post (pinion gear is missing here).

20210618_012315s.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...