Jump to content
Sign in to follow this  
cardz

Problem With Tanaka M24

Recommended Posts

I have a Tanaka M24 with a KN 6.04 tight bore barrel, Best Gun Hop Up Kit, and the G&G Power Pack. I use Green Gas and .30g Digicon BBs. When I first received the gun I would get 4-5 inch groups at only 30 ft. (which is the longest shooting line I can set up where I live). In the field it would hit a balloon at 100 ft. about 1 out of 3 shots. It would usually pop the balloon, too.

 

After installing all the upgrades, the accuracy improved. However, it consistently shoots low. The first few shots with a new magazine are dead on target at 30 ft. After that they drop to about 1-2 inches below where I'm aiming. I've tinkered around with the gun and I can't fix this problem. Even with the Hop Up and the scope elevation turned all the way up it still does this. I think something is misaligned but I can't figure out what it is or what to do about it.

 

What could be causing my M24 to consistently shoot low despite adjusting everything accordingly?

 

 

Thanks,

-Matt C.-

Share this post


Link to post
Share on other sites

by shooting low, do you mean the bb just drops? or it doesnt seem to be shooting as hard?

 

one of the problems might be the striker spring. after a few shoots the spring has a tendency to cause the screw thats keeping the spring compressed to come loose. to access this spring you have to take out the bolt, take out the 2 screws thats in the middle of the bolt, and you'll see the spring. if you look at the top of the spring there is a flat head type screw. turn the screw to the right *righty tighty, lefty loosey*. make sure its tight. if that doesn't work. just have patience and make sure you put everything in correctly. double check everything. as a Tanaka m24 owner you should know that it takes patience. good luck.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...